Abstract

A software-based digital signal processing (DSP) method using the data system processor has been developed to demodulate the photoacoustic responses of a sample to the fundamental phase modulation frequency and its harmonic frequencies (up to the ninth harmonic) in step-scan FT-IR photoacoustic measurements, without the use of any additional hardware. The DSP algorithm and its sampling depth multiplexing advantages are compared to conventional hardware demodulation. Comparison of results from the DSP method to those from hardware demodulators are shown at both the phase modulation frequency and the harmonics, and application of the DSP method to step-scan photoacoustic measurements with phase modulation is discussed as it applies to obtaining depth profile information in heterogeneous materials.

Photoacoustic phase-controlled Fourier-transform infrared spectroscopy

Santeri Larnimaa, Mikhail Roiz, and Markku Vainio
Opt. Continuum 2(3) 564-578 (2023)

Step-scan differential Fourier transform infrared photoacoustic spectroscopy (DFTIR-PAS): a spectral deconvolution method for weak absorber detection in the presence of strongly overlapping background absorptions

Lixian Liu, Andreas Mandelis, Huiting Huan, and Kirk H. Michaelian
Opt. Lett. 42(7) 1424-1427 (2017)

Quantitative Fourier transform IR photoacoustic spectroscopy of condensed phases

Y. C. Teng and B. S. H. Royce
Appl. Opt. 21(1) 77-80 (1982)

High temperature Fourier transform photoacoustic spectroscopy: sample emission effects

S. McGovern, B. S. H. Royce, and J. Benziger
Appl. Opt. 24(10) 1512-1514 (1985)

Visible intracavity laser spectroscopy with a step-scan Fourier-transform interferometer

Kimberly Strong, Timothy J. Johnson, and Geoffrey W. Harris
Appl. Opt. 36(33) 8533-8540 (1997)