Abstract
With the reactivation of the Purex Fuel Reprocessing Facility at Hanford, a method for the determination of metal impurities in plutonium nitrate solutions is needed. The need was met by the use of amine extraction for the separation of plutonium and optical emission spectrometry for the analysis. Some 10 impurity metals are listed in the specifications (see Table I). Optical emission spectrometry with its simultaneous, multielement capability is a good candidate technique. Inductively coupled plasma (ICP) emission spectrometry is even better. The extremely high temperature of the plasma minimizes chemical and ionization interferences. The plasma, furthermore, is more stable than the arc or spark and leads to better precision. Analytical wavelengths were selected from the EPA document of Winge <i>et al.</i> In order to check for interferences, scans were run across the selected wavelengths with each of the specification elements; scans were also made with more common interferences listed in an atlas of spectral interferences. The lines listed in Table II were found to be free of interferences and are recommended for the analysis.
PDF Article
More Like This
Practical and highly sensitive elemental analysis for aqueous samples containing metal impurities employing electrodeposition on indium-tin oxide film samples and laser-induced shock wave plasma in low-pressure helium gas
Koo Hendrik Kurniawan, Marincan Pardede, Rinda Hedwig, Syahrun Nur Abdulmadjid, Kurnia Lahna, Nasrullah Idris, Eric Jobiliong, Hery Suyanto, Maria Margaretha Suliyanti, May On Tjia, Tjung Jie Lie, Zener Sukra Lie, Davy Putra Kurniawan, and Kiichiro Kagawa
Appl. Opt. 54(25) 7592-7597 (2015)
Cited By
You do not have subscription access to this journal. Cited by links are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.
Contact your librarian or system administrator
or
Login to access Optica Member Subscription