Abstract

Parameters affecting the stability of premixed oxyhydrogen and oxyacetylene flames are investigated. The results of this study show the effect of port diameter, fuel-oxidant ratio, total gas flow, and burner temperature on the stability of these flames. Data were obtained by the use of a specially designed and constructed one-hole insert burner. The results of this study provide the required design criteria and operational parameters for utilization of these fuel mixtures

Atomic Emission Characteristics of a Premixed Acetylene–Nitrous Oxide, Total Consumption Flame

Victor G. Mossotti and Marjorie Duggan
Appl. Opt. 7(7) 1325-1330 (1968)

Atomic Absorption Spectroscopy with High Temperature Flames

J. B. Willis
Appl. Opt. 7(7) 1295-1304 (1968)

Measurement of ultrafast combustion process of premixed ethylene/oxygen flames in narrow channel with digital holographic interferometry

Teli Xi, Jianglei Di, Ying Li, Siqing Dai, Chaojie Ma, and Jianlin Zhao
Opt. Express 26(22) 28497-28504 (2018)

High-repetition-rate burst-mode-laser diagnostics of an unconfined lean premixed swirling flame under external acoustic excitation

Sirui Wang, Xunchen Liu, Guoqing Wang, Liangliang Xu, Lei Li, Yingzheng Liu, Zhen Huang, and Fei Qi
Appl. Opt. 58(10) C68-C78 (2019)

Absolute concentration measurements of atomic hydrogen in subatmospheric premixed H₂/O₂/N₂ flat flames with photoionization controlled-loss spectroscopy

J. Thaddeus Salmon and Normand M. Laurendeau
Appl. Opt. 26(14) 2881-2891 (1987)