Abstract

The spectrographic analysis of volatile acids in a high-purity form is reviewed and a procedure presented that involves evaporation of a 100-g sample under temperature controlled contamination-free conditions and emission spectrography using dc-arc excitation under controlled atmosphere. In the evaporation, graphite (10 mg) is added as a collector, sulfuric acid to convert to less volatile sulfates (with acetic, hydrochloric, and nitric acids), and also mannitol to retain boron (with hydrochloric and hydrofluoric acids). Indium is added as a internal standard. Spectra are examined for 33 elements against a multielement standard in graphite containing indium as an internal standard. For the concurrent analysis of three samples, the elapsed time is 4–10 h and the actual working time 3–5 h. Recovery studies are reported as well as the use of the procedure in the assessment of the leaching of borosilicate glass by concentrated mineral acids.

The Spectrochemical Analysis of Copper Base Alloys*

Edwin K. Jaycox
J. Opt. Soc. Am. 35(2) 175-179 (1945)

An Application of Spectrographic Methods to Chemical Concentrations of Trace Elements in Iron and Steel Analysis

R. A. Wolfe and R. G. Fowler
J. Opt. Soc. Am. 35(1) 86-91 (1945)

Spectrochemical Analysis by the Copper Spark Method*

Mark Fred, Norman H. Nachtrieb, and Frank S. Tomkins
J. Opt. Soc. Am. 37(4) 279-287 (1947)

The Spectrochemical Analysis of Nickel Alloys*

Edwin K. Jaycox
J. Opt. Soc. Am. 37(3) 159-162 (1947)

The Quantitative Spectrochemical Determination of Barium, Strontium, and Calcium*

Werner Hartmann and Betty E. Prescott
J. Opt. Soc. Am. 38(6) 539-541 (1948)