Abstract

A convenient way to file KBr Pellets is to cut thin-walled polyethylene tubing into 2" lengths, staple each in the middle to make two compartments, and close filled compartment with a staple (or paper clip, temporarily). Small pieces of card with file numbers are attached with scotch tape to outside. Contents are visible. The flat pellet files are stored in a desiccator to keep in a dry atmosphere. File information is easily kept on 3" × 5" cards, 10 to a card.

Sulfuric acid in KBr pellet spectroscopy

Frederic E. Volz
Appl. Opt. 18(14) 2353-2354 (1979)

Alteration of the Muscovite Absorption Spectrum by KBr Pellet Preparation

Stanley Ruthberg, Mary W. Barnes, and Ralph H. Noyce
Appl. Opt. 2(2) 177-177 (1963)

Method to derive the infrared complex refractive indices n(λ) and k(λ) for organic solids from KBr pellet absorption measurements

Kelly A. Peterson, Ryan M. Francis, Catherine A. Banach, Ashley M. Bradley, Sarah D. Burton, Jeremy D. Erickson, Schuyler P. Lockwood, Karissa L. Jensen, Michael O. Yokosuk, Timothy J. Johnson, and Tanya L. Myers
Appl. Opt. 63(6) 1553-1565 (2024)

Measuring the Transmittance of Atmospheric Dust in KBr Pellets Using a CO₂ Laser

Kenneth O. White and James D. Lindberg
Appl. Opt. 12(11) 2544-2545 (1973)

Reduction of speckle noise and mitigation of beam wander in tunable external cavity quantum cascade lasers using rotating diamond/KBr pellet coupled with multimode fiber

Yohan Yoon, Christopher J. Breshike, Christopher A. Kendziora, Robert Furstenberg, and R. Andrew McGill
Opt. Express 27(6) 8011-8020 (2019)