Abstract
Novel Ag on TiO<sub>2</sub> films are generated by semiconductor photocatalysis and characterized by ultraviolet–visible (UV/Vis) spectroscopy, scanning electron microscopy (SEM), and atomic force microscopy (AFM), as well as assessed for surface-enhanced Raman scattering (SERS) activity. The nature and thickness of the photodeposited Ag, and thus the degree of SERS activity, is controlled by the time of exposure of the TiO<sub>2</sub> film to UV light. All such films exhibit the optical characteristics (λ<sub>max</sub> ≅ 390 nm) of small (< 20 nm) Ag particles, although this feature becomes less prominent as the film becomes thicker. The films comprise quite large (> 40 nm) Ag islands that grow and merge with increasing levels of Ag photodeposition. Tested with a benzotriazole dye probe, the films are SERS active, exhibiting activity similar to that of 6-nm-thick vapor-deposited films. The Ag/TiO<sub>2</sub> films exhibit a lower residual standard deviation (~ 25%) compared with Ag vapor-deposited films (~ 45%), which is, however, still unacceptable for quantitative work. The sample-to-sample variance could be reduced significantly (< 7%) by spinning the film during the SERS measurement. The Ag/TiO<sub>2</sub> films are mechanically robust and resistant to removal and damage by scratching, unlike the Ag vapor-deposited films. The Ag/TiO<sub>2</sub> films also exhibit no obvious loss of SERS activity when stored in the dark under otherwise ambient conditions. The possible extension of this simple, effective method of producing Ag films for SERS, to metals other than Ag and to semiconductors other than TiO<sub>2</sub>, is briefly discussed.
PDF Article
More Like This
Cited By
You do not have subscription access to this journal. Cited by links are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.
Contact your librarian or system administrator
or
Login to access Optica Member Subscription