Cyanide ion (CN<sup>-</sup>) has been the subject of numerous studies probing the mechanisms underlying the surface-enhanced Raman scattering (SERS) phenomenon. This work examines various aspects critical to application of SERS for direct detection of trace cyanide in groundwater and in wastewater streams. A new method for direct quantitation of cyanide in aqueous electrolyte has been developed that uses an <i>ex situ</i> oxidation-reduction cycle to precondition a planar silver electrode. Cyanide ion can be detected in 0.1 M KCI with a linear response between 100 ppm and 10 ppb. The estimated limit of detection is approximately 8 ppb. The effects of pH, electrolyte level, and two common background ions, nitrate (NO<sub>3</sub>-) and sulfate (SO<sub>4</sub><sup>2-</sup>), have been characterized. Cyanide response was found to be sensitive to pH, with optimal performance observed at neutral to basic pH. Electrolyte concentrations of 0.001 M reduced response to cyanide by a factor of five, while levels above 0.1 M had no significant effect. The addition of 10-ppm sulfate ion decreased response approximately 40%, while the presence of nitrate ion at concentrations up to 100 ppm had a negligible effect on SERS response. These results suggest that cyanide ion can be detected directly in high-ionic-strength aqueous solutions, such as groundwater.

PDF Article

Cited By

You do not have subscription access to this journal. Cited by links are available to subscribers only. You may subscribe either as an OSA member, or as an authorized user of your institution.

Contact your librarian or system administrator
Login to access OSA Member Subscription