Abstract

An analytical solution for the determination of both angle of incidence (AOI) and the complex refractive index from combined ellipsometric and reflectometric measurements at optically isotropic substrates is presented. Conventional ellipsometers usually measure flat surfaces because the curvatures of the surface alter the reflected or transmitted light, which causes experimental errors due to the deviation of the incident angle. However, in real industrial applications, the shapes of samples are usually curved or even free-form. In this case, the knowledge of the AOI is essential. The proposed method provides a simple way to measure the AOI and the complex refractive index of nonplanar samples without extra or complicated hardware.

© 2021 Optical Society of America

Bare and thin-film-coated substrates with null reflection for p- and s-polarized light at the same angle of incidence: reflectance and ellipsometric parameters as functions of substrate refractive index and film thickness

R. M. A. Azzam
Appl. Opt. 55(30) 8464-8467 (2016)

Robust incident angle calibration of angle-resolved ellipsometry for thin film measurement

Lihua Peng, Dawei Tang, Jian Wang, Rong Chen, Feng Gao, and Liping Zhou
Appl. Opt. 60(13) 3971-3976 (2021)

Ellipsometric Method for the Determination of All the Optical Parameters of the System of an Isotropic Nonabsorbing Film on an Isotropic Absorbing Substrate. Optical Constants of Silicon*

K. Vedam, W. Knausenberger, and F. Lukes
J. Opt. Soc. Am. 59(1) 64-71 (1969)

Sensitivity of the Ellipsometric Parameters to Angle-of-Incidence Variations

James R. Zeidler, R. B. Kohles, and N. M. Bashara
Appl. Opt. 13(7) 1591-1594 (1974)

Removing the influence of the angle of incidence in a dual rotating retarder Mueller matrix polarimeter

Yao Fu, Zhenhua Chen, Zhilie Tang, and Yanhong Ji
Appl. Opt. 60(27) 8472-8479 (2021)