Abstract

In this paper, a reflective fiber sensing system combined with a fiber loop ringdown technique for temperature detection is proposed. A fiber Bragg grating (FBG) with an initial center wavelength of 1543.33 nm was set as the sensor head. The experimental results showed that the average sensitivity of temperature was 1.003 µs/°C in the temperature range of 30–38°C, and the resolution was 0.007°C, which is 14 times better than the current FBG sensing demodulator. In addition, the system has the advantages of simple structure, low cost, and insensitivity to optical power fluctuation.

© 2020 Optical Society of America

Real time interrogation technique for fiber Bragg grating enhanced fiber loop ringdown sensors array

Yunlong Zhang, Ruoming Li, Yuechun Shi, Jintao Zhang, Xiangfei Chen, and Shengchun Liu
Opt. Express 23(11) 14245-14251 (2015)

Fiber loop ringdown humidity sensor

Haifa Alali and Chuji Wang
Appl. Opt. 55(31) 8938-8945 (2016)

Temperature sensor based on fiber Bragg grating combined with a microwave photonic-assisted fiber loop ring down

Xiaozhong Tian, Jingzhan Shi, Yiping Wang, Yun She, and Le Li
Opt. Express 30(6) 10110-10118 (2022)

Fiber loop ringdown for physical sensor development: pressure sensor

Chuji Wang and Susan T. Scherrer
Appl. Opt. 43(35) 6458-6464 (2004)

Fiber-cavity ring-down temperature sensor using a transmissive configuration combined with the heterodyne detection technique

Keiji Kuroda, Taiki Ikeguchi, and Hisaki Oka
Appl. Opt. 63(3) 676-680 (2024)