Expand this Topic clickable element to expand a topic
Skip to content
Optica Publishing Group

Robust digital holography design with monitoring setup and reference tilt error elimination

Not Accessible

Your library or personal account may give you access

Abstract

A robust digital holography recording design is presented to complete the work of switching between in-line and off-axis recording methods. We precisely supervise the off-axis angle in off-axis holography, so that the original reconstructed image can be separated by a minimum off-axis angle. In the design, we can also monitor and remove the negative effects of the reference tilt error in phase-shifting digital holography. Compared with the conventional digital holographic recording configuration, a supervising unit is introduced to control and to monitor the angle between the reference beam and object beam. By the Fourier analysis on the interferograms recorded by the supervising unit and using the corresponding equations, the off-axis angle, which is crucial to reset the object image in holographic reconstruction, can be calculated accurately and then chosen for the best recording angle. For in-line holography, the error affecting the slight tilt of the reference beam on the retrieved object wavefront can be eliminated completely because the tilt angle is detected by another independent device. Furthermore, by using this advanced design, the experimental arrangement can be transformed flexibly from the in-line recording state to the off-axis state or from the latter one to the former without rebuilding the experimental setup. The availability and effectiveness of this design are verified by a series of experiments.

© 2018 Optical Society of America

Full Article  |  PDF Article
More Like This
Detection and correction of wavefront errors caused by slight reference tilt in two-step phase-shifting digital holography

Xianfeng Xu, Luzhong Cai, Fei Gao, Yulei Jia, and Hui Zhang
Appl. Opt. 54(32) 9591-9596 (2015)

Dual-plane slightly off-axis digital holography based on a single cube beam splitter

Miguel León-Rodríguez, Juan A. Rayas, Raúl R. Cordero, Amalia Martínez-García, Adrián Martínez-Gonzalez, Alejandro Téllez-Quiñones, Pedro Yañez-Contreras, and Orlando Medina-Cázares
Appl. Opt. 57(10) 2727-2735 (2018)

Correction of wave-front errors caused by the slight tilt of a reference beam in phase-shifting interferometry

Lu-Zhong Cai, Ming-Zhao He, and Qing Liu
Appl. Opt. 43(17) 3466-3471 (2004)

Cited By

You do not have subscription access to this journal. Cited by links are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.

Contact your librarian or system administrator
or
Login to access Optica Member Subscription

Figures (9)

You do not have subscription access to this journal. Figure files are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.

Contact your librarian or system administrator
or
Login to access Optica Member Subscription

Equations (16)

You do not have subscription access to this journal. Equations are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.

Contact your librarian or system administrator
or
Login to access Optica Member Subscription

Select as filters


Select Topics Cancel
© Copyright 2024 | Optica Publishing Group. All Rights Reserved