Abstract
Cross-structured light sensor architecture for 3D reconstruction was established. An improved center of mass method was proposed for laser stripe extraction. For each initial laser stripe center point, the center of mass method was performed along the normal direction that was calculated using the Hessian matrix. The normal directions can be used to divide the laser stripe center points into two categories. Laser stripe extraction experiments showed that the proposed method is fast and robust. 3D reconstruction of a cylinder was used to analyze reconstruction accuracy, with relative accuracy of less than 0.15 mm. 3D reconstruction of a shoe last showed that cross-structured light sensors can obtain more abundant information than single-structured light sensors.
© 2017 Optical Society of America
Full Article | PDF ArticleMore Like This
Yang Zhang, Wei Liu, Wenqi Wang, Peng Gao, Hongwen Xing, and Jianwei Ma
Appl. Opt. 59(22) 6573-6583 (2020)
Chuan Ye, Wenrong Feng, Qiyan Wang, Chao Wang, Bo Pan, Youchun Xie, Yuanyao Hu, and Jian Chen
Appl. Opt. 61(18) 5409-5418 (2022)
Maosen Wan, Shuaidong Wang, Huining Zhao, Huakun Jia, and Liandong Yu
Appl. Opt. 60(36) 11196-11204 (2021)