Abstract

No abstract available.

Full Article  |  PDF Article

References

  • View by:
  • |
  • |
  • |

  1. J. U. White, J. Opt. Soc. Amer. 32, 285 (1942).
    [CrossRef]
  2. T. H. Edwards, J. Opt. Soc. Amer. 51, 98 (1961).
    [CrossRef]
  3. H. M. Pickett, Ph.D. Dissertation, University of California, Berkeley (1969), gives some more detail on construction of the mirrors and on the method of aligning the cell.

1961

T. H. Edwards, J. Opt. Soc. Amer. 51, 98 (1961).
[CrossRef]

1942

J. U. White, J. Opt. Soc. Amer. 32, 285 (1942).
[CrossRef]

Edwards, T. H.

T. H. Edwards, J. Opt. Soc. Amer. 51, 98 (1961).
[CrossRef]

Pickett, H. M.

H. M. Pickett, Ph.D. Dissertation, University of California, Berkeley (1969), gives some more detail on construction of the mirrors and on the method of aligning the cell.

White, J. U.

J. U. White, J. Opt. Soc. Amer. 32, 285 (1942).
[CrossRef]

J. Opt. Soc. Amer.

J. U. White, J. Opt. Soc. Amer. 32, 285 (1942).
[CrossRef]

T. H. Edwards, J. Opt. Soc. Amer. 51, 98 (1961).
[CrossRef]

Other

H. M. Pickett, Ph.D. Dissertation, University of California, Berkeley (1969), gives some more detail on construction of the mirrors and on the method of aligning the cell.

Cited By

OSA participates in CrossRef's Cited-By Linking service. Citing articles from OSA journals and other participating publishers are listed here.

Alert me when this article is cited.


Figures (2)

Fig. 1
Fig. 1

Long path length cell. Light enters the cell via the cassagrainian mirrors M1 and M2 and then continues via M3 and M4 to the multiple pass section consisting of W1, W2, and W3. The light leaves this section via mirrors M5 and M6. Note that M5 is on top of M4. Light reaches the detector via M7 and M8 or by M9 and M10. M10 has a hole in its center. L1 is a light cone which directs the light to a Golay cell detector. The cross hatching represents Bakelite thermal insulation. The position of W1 is adjustable from outside of the cell.

Fig. 2
Fig. 2

Image positions on the field mirror W3. The circles are at the positions of the centers of curvature of the image mirrors W2 and W1. The center of curvature of W2 is fixed in the center of W3, and the center of W1 is adjusted to give the desired number of images.

Metrics