Expand this Topic clickable element to expand a topic
Skip to content
Optica Publishing Group

Synchronous Detection vs Pulse Counting for Sensitive Photomultiplier Detection Systems

Not Accessible

Your library or personal account may give you access

Abstract

Synchronous detection is compared experimentally with pulse counting, as techniques for use with photomultipliers in very sensitive optical detection systems. The criterion for comparison is the signal-to-noise ratio, defined as the ratio of the value of a measurement to its standard deviation. Care is taken to obtain optimum S/N with each method. An EMI 9558B tube is used. Some observations are as follows. (1) For light levels below the dark current equivalent level, pulse counting gives somewhat better S/N than synchronous detection. The improvement in S/N is by a factor of three at 6 × 10−17 W, the lowest illumination tested. The advantage of pulse counting increases as illumination decreases. On the other hand, for light levels of the order of the dark current equivalent level or larger, synchronous detection, pulse counting, and simple dc current measurement give substantially equal results. (2) With this tube, signal-to-noise ratios are only slightly improved by cooling. The improvement in S/N is of the order of a factor of 1.5 for pulse counting and of the order of 3 for synchronous detection.

© 1968 Optical Society of America

Full Article  |  PDF Article
More Like This
Evaluation of Magnetic Defocusing for a Photomultiplier Tube with Large Area Semitransparent Photocathode

W. Knight, Y. Kohanzadeh, and G. Lengyel
Appl. Opt. 7(6) 1115-1120 (1968)

Noise in the Measurement of Light with Photomultipliers

F. Robben
Appl. Opt. 10(4) 776-796 (1971)

The Efficient Use of Photomultiplier Tubes for Recording Spectra

J. Rolfe and S. E. Moore
Appl. Opt. 9(1) 63-71 (1970)

Cited By

You do not have subscription access to this journal. Cited by links are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.

Contact your librarian or system administrator
or
Login to access Optica Member Subscription

Figures (8)

You do not have subscription access to this journal. Figure files are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.

Contact your librarian or system administrator
or
Login to access Optica Member Subscription

Select as filters


Select Topics Cancel
© Copyright 2024 | Optica Publishing Group. All Rights Reserved