Abstract

The qualitative and quantitative study of raw steatite was carried out using a pulsed nanosecond Nd:YAG laser set to fundamental harmonic (1064 nm) at atmospheric pressure. To cross-validate the data, x-ray diffraction (XRD), x-ray fluorescence (XRF) spectroscopy, and Fourier-transform infrared spectroscopy (FTIR) were used. The analysis of optical emission spectra in the wavelength range 200–720 nm showed the existence of silica (Si), magnesium (Mg), and calcium (Ca). The plasma temperature and electron number density were estimated using the Boltzmann plot and Stark-broadening line profile methods, with results at 4906 K and ${1.47}\times{{10}^{17}}\;{{\rm cm}^{- 3}}$, respectively. The quantitative study was carried out using the calibration-free laser-induced breakdown spectroscopy (CF-LIBS) process, assuming local thermodynamic equilibrium and an optically thin plasma, and the following results were obtained: Si = 63.37%, Mg = 35.95%, and Ca = 0.671%. The quantitative findings obtained using the CF-LIBS approach were consistent with those obtained using XRD, XRF, and FTIR, demonstrating the applied methods’ potential to be effective and complementary for the qualitative and quantitative study of multiphase raw steatite.

© 2021 Optical Society of America

Quantitative elemental analysis of high silica bauxite using calibration-free laser-induced breakdown spectroscopy

Muhammad Fahad, Sajjad Ali, Khizar Hussain Shah, Asim Shahzad, and Muhammad Abrar
Appl. Opt. 58(27) 7588-7596 (2019)

Comparative study of calibration-free laser-induced breakdown spectroscopy methods for quantitative elemental analysis of quartz-bearing limestone

Muhammad Fahad, Zahid Farooq, and Muhammad Abrar
Appl. Opt. 58(13) 3501-3508 (2019)

Experimental investigation of laser-induced breakdown spectroscopy assisted with laser-induced fluorescence for trace aluminum detection in steatite ceramics

Nan Zhao, Dongqi Lei, Xiangyou Li, Jiaming Li, Qiongxiong Ma, Qingmao Zhang, Liang Guo, and Yongfeng Lu
Appl. Opt. 58(8) 1895-1899 (2019)

Calibration-free laser-induced breakdown spectroscopic analysis of copper-rich mineral collected from the Gilgit-Baltistan region of Pakistan

Muhammad Hafeez, Shahab Ahmed Abbasi, Muhammad Rafique, Rizwan Hayder, Muhammad Sajid, Javed Iqbal, Nasar Ahmad, and Shabnum Shahida
Appl. Opt. 59(1) 68-76 (2020)

Quantitative elemental analysis of steel using calibration-free laser-induced breakdown spectroscopy

M. L. Shah, A. K. Pulhani, G. P. Gupta, and B. M. Suri
Appl. Opt. 51(20) 4612-4621 (2012)