Add to BibSonomy
Abstract
Improving photothermal efficiency can reduce the melting threshold of metal nanowires. The photothermal efficiency of a polarized laser to Cu nanowires was investigated by numerical simulation and experiment. Our simulation results reveal that the photothermal efficiency of a polarized laser depends on the intensity and distribution area of surface plasmons excited by the laser. As the angle between the polarization direction of the incident laser and the long axis of the Cu nanowire increases, the laser-excited surface plasmons shift from both ends to the sidewall of the Cu nanowire. Such a distribution of surface plasmons was confirmed by the melting behavior of Cu nanowires irradiated by a 450 nm polarized laser. Increasing the laser wavelength will enhance the intensity of the surface plasmons but reduce the distribution area of the surface plasmons. As a result, a higher photothermal efficiency was achieved using a laser with a polarization direction perpendicular to the long axis of the Cu nanowire and a wavelength less than 550 nm. Due to the higher photothermal efficiency, the melting threshold of Cu nanowire irradiated by a laser with polarization perpendicular to the long axis of the Cu nanowire is 32 mW, which is around 20% lower that of Cu nanowire irradiated by a laser with polarization parallel to the long axis of the Cu nanowire.
© 2021 Optical Society of America
Full Article | PDF ArticleMore Like This
Hui Wan, Chengqun Gui, Dong Chen, Jiaohao Miao, Qiang Zhao, Shiyi Luan, and Shengjun Zhou
Appl. Opt. 59(7) 2186-2191 (2020)
Min Song, Gengxu Chen, Yan Liu, E Wu, Botao wu, and Heping Zeng
Opt. Express 20(20) 22290-22297 (2012)
Jiunn-Woei Liaw, Szu-Yao Mao, Jia-Yun Luo, Yun-Cheng Ku, and Mao-Kuen Kuo
Opt. Express 29(12) 18876-18888 (2021)