Abstract

In this paper, an electro-optical 4-to-2 encoder based on a photonic crystal is presented. The structure is composed of four silicon waveguides, four photonic crystal structures including the graphene–${{\rm Al}_2}{{\rm O}_3}$ stacks, and two optical combiners. Two one-dimensional arrays of air holes in the silicon background are designed parallel to the waveguides. Also, a graphene–${{\rm Al}_2}{{\rm O}_3}$ stack is placed at the center of each array, which provides the desired interferences. This feature is used for controlling the optical wave transmission through the waveguides. Using two optical combiners at the end of two waveguides, the received signals from the waveguides will be guided toward the output ports. The amount of the transmitted signal from input ports to the output of the encoder can be controlled by applying the proper chemical potential to the graphene-based stacks. The simulation results show that the encoding operation can be achieved by using 0.2 eV and 0.8 eV for chemical potentials. In addition, the normalized output power margins for logic 0 and 1 are calculated to be 8.2% and 46.7%, respectively. The footprint for the proposed structure is approximately equal to ${127}\;\unicode{x00B5} {{\rm m}^2}$. Also, the required optical power intensity at input ports is ${100}\;{\rm mW/}\unicode{x00B5} {{\rm m}^2}$.

© 2020 Optical Society of America

Full Article  |  PDF Article
More Like This
Electro-optic modulator side-coupled with a photonic crystal nanobeam loaded graphene/Al2O3 multilayer stack

Hanqing Liu, Peiguo Liu, Li-an Bian, Chenxi Liu, and Qihui Zhou
Opt. Mater. Express 8(4) 761-774 (2018)

Tunable electro-optic analog-to-digital converter using graphene nanoshells in photonic crystal ring resonators

Saleh Naghizade and Hamed Saghaei
J. Opt. Soc. Am. B 38(7) 2127-2134 (2021)

Mid-infrared electro-optic modulator based on a graphene-embedded plasmonic rib waveguide with ultrahigh electro-optic wavelength tuning

Chenyang Hou, Tao Ma, Jinhui Gao, Heng Liu, and Fang Wang
Appl. Opt. 60(10) 2795-2802 (2021)

References

You do not have subscription access to this journal. Citation lists with outbound citation links are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.

Contact your librarian or system administrator
or
Login to access Optica Member Subscription

Cited By

You do not have subscription access to this journal. Cited by links are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.

Contact your librarian or system administrator
or
Login to access Optica Member Subscription

Figures (6)

You do not have subscription access to this journal. Figure files are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.

Contact your librarian or system administrator
or
Login to access Optica Member Subscription

Tables (3)

You do not have subscription access to this journal. Article tables are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.

Contact your librarian or system administrator
or
Login to access Optica Member Subscription

Equations (6)

You do not have subscription access to this journal. Equations are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.

Contact your librarian or system administrator
or
Login to access Optica Member Subscription

Metrics

You do not have subscription access to this journal. Article level metrics are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.

Contact your librarian or system administrator
or
Login to access Optica Member Subscription