Abstract

A long focal length focusing device is proposed for the process of glass welding by femtosecond laser pulses at high repetition rate and we report on the significant advantages. The study is performed using a 100 mm focusing length F-theta lens. The results are compared to those obtained with a high numerical aperture microscope objective. The long focal length with the associated Rayleigh length method allows a robust high process speed: welding at 1000 mm/s has been achieved, several orders of magnitude larger compared to what was reported until now. Moreover, for one pulse, the same energy on a larger laser spot leads to a lower thermic gradient increase. As a result, with the proposed parameters, the heat accumulation process reduces the residual stress in the welding seams, preventing the formation of fractures inside the seams: mechanical resistance at 30 MPa has been measured.

© 2019 Optical Society of America

Full Article  |  PDF Article
OSA Recommended Articles
Welding of PMMA by a femtosecond fiber laser

Annalisa Volpe, Francesca Di Niso, Caterina Gaudiuso, Andrea De Rosa, Rebeca Martínez Vázquez, Antonio Ancona, Pietro Mario Lugarà, and Roberto Osellame
Opt. Express 23(4) 4114-4124 (2015)

Femtosecond laser Bessel beam welding of transparent to non-transparent materials with large focal-position tolerant zone

Guodong Zhang, Razvan Stoian, Wei Zhao, and Guanghua Cheng
Opt. Express 26(2) 917-926 (2018)

Avoiding the requirement for pre-existing optical contact during picosecond laser glass-to-glass welding

Jianyong Chen, Richard M. Carter, Robert R. Thomson, and Duncan P. Hand
Opt. Express 23(14) 18645-18657 (2015)

References

You do not have subscription access to this journal. Citation lists with outbound citation links are available to subscribers only. You may subscribe either as an OSA member, or as an authorized user of your institution.

Contact your librarian or system administrator
or
Login to access OSA Member Subscription

Cited By

You do not have subscription access to this journal. Cited by links are available to subscribers only. You may subscribe either as an OSA member, or as an authorized user of your institution.

Contact your librarian or system administrator
or
Login to access OSA Member Subscription

Figures (10)

You do not have subscription access to this journal. Figure files are available to subscribers only. You may subscribe either as an OSA member, or as an authorized user of your institution.

Contact your librarian or system administrator
or
Login to access OSA Member Subscription

Tables (1)

You do not have subscription access to this journal. Article tables are available to subscribers only. You may subscribe either as an OSA member, or as an authorized user of your institution.

Contact your librarian or system administrator
or
Login to access OSA Member Subscription

Equations (3)

You do not have subscription access to this journal. Equations are available to subscribers only. You may subscribe either as an OSA member, or as an authorized user of your institution.

Contact your librarian or system administrator
or
Login to access OSA Member Subscription

Metrics

You do not have subscription access to this journal. Article level metrics are available to subscribers only. You may subscribe either as an OSA member, or as an authorized user of your institution.

Contact your librarian or system administrator
or
Login to access OSA Member Subscription