Abstract

Extreme ultraviolet lithography is regarded as the most attractive technology to achieve 7 nm node and below. A new high-numerical-aperture anamorphic objective lens is designed to extend the single exposure resolution limit. However, the polarization aberrations (PAs) induced by the multilayer coatings on mirrors cause pattern distortions that cannot be neglected. In this paper, a source, mask, and process parameter co-optimization method is developed to compensate for the pattern distortions caused by PAs and increase the process window (PW). We first present an asymmetric source represented by the superposition of Zernike polynomials to reduce the pattern placement error (PPE). Then, a weighted cost function that incorporates the influences of PAs is innovated. Finally, a gradient-based statistical optimization method is adopted to minimize the cost function by optimizing the lithography system parameters alternately. Simulations at the 7 nm node of the 1D mask pattern indicate that for the system with a PA of marginal field, compared with our earlier work, the critical dimension error and PPE of the proposed method are reduced by 75.0% and 82.4%, respectively, and the PW is increased by 97.4%.

© 2019 Optical Society of America

Multi-objective lithographic source mask optimization to reduce the uneven impact of polarization aberration at full exposure field

Tie Li, Yiyu Sun, Enze Li, Naiyuan Sheng, Yanqiu Li, Pengzhi Wei, and Yang Liu
Opt. Express 27(11) 15604-15616 (2019)

Exposure latitude aware source and mask optimization for extreme ultraviolet lithography

Lulu Zou, Yiyu Sun, Pengzhi Wei, Miao Yuan, Zhaoxuan Li, Lihui Liu, and Yanqiu Li
Appl. Opt. 60(30) 9404-9410 (2021)

Robust hybrid source and mask optimization to lithography source blur and flare

Chunying Han, Yanqiu Li, Xu Ma, and Lihui Liu
Appl. Opt. 54(17) 5291-5302 (2015)

Source mask optimization for extreme-ultraviolet lithography based on thick mask model and social learning particle swarm optimization algorithm

Zinan Zhang, Sikun Li, Xiangzhao Wang, Wei Cheng, and Yuejing Qi
Opt. Express 29(4) 5448-5465 (2021)

Multiple-field-point pupil wavefront optimization in computational lithography

Tie Li, Yang Liu, Yiyu Sun, Enze Li, Pengzhi Wei, and Yanqiu Li
Appl. Opt. 58(30) 8331-8338 (2019)