Expand this Topic clickable element to expand a topic
Skip to content
Optica Publishing Group

Polishing the surface of a z-cut KDP crystal by neutralized argon ions

Not Accessible

Your library or personal account may give you access

Abstract

The sputtering yield and dynamics of the surface roughness of the potassium dihydrogenphosphate—KH2PO4 (KDP) crystal z-cut was initially polished by precision micromilling with a diamond cutter, after which surface treatment by neutralized Ar ions was studied. The sputtering yield turned out to be noticeably higher than the values for materials that are amenable to ion polishing (fused silica, ULE, Zerodur, etc.), but the polishing effect at angles of incidence of 0°, 30°, and 45° was found. A record value of the effective surface roughness in the spatial frequencies range of ν[4.9·1026.3·101μm1] σeff=0.61nm was obtained.

© 2018 Optical Society of America

Full Article  |  PDF Article
More Like This
Ion-beam polishing of fused silica substrates for imaging soft x-ray and extreme ultraviolet optics

N. I. Chkhalo, S. A. Churin, M. S. Mikhaylenko, A. E. Pestov, V. N. Polkovnikov, N. N. Salashchenko, and M. V. Zorina
Appl. Opt. 55(6) 1249-1256 (2016)

Influence of ion-beam etching by Ar ions with an energy of 200–1000 eV on the roughness and sputtering yield of a single-crystal silicon surface

M. S. Mikhailenko, A. E. Pestov, N. I. Chkhalo, M. V. Zorina, A. K. Chernyshev, N. N. Salashchenko, and I. I. Kuznetsov
Appl. Opt. 61(10) 2825-2833 (2022)

Research of polishing process to control the iron contamination on the magnetorheological finished KDP crystal surface

Shaoshan Chen, Shengyi Li, Xiaoqiang Peng, Hao Hu, and Guipeng Tie
Appl. Opt. 54(6) 1478-1484 (2015)

Cited By

You do not have subscription access to this journal. Cited by links are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.

Contact your librarian or system administrator
or
Login to access Optica Member Subscription

Figures (12)

You do not have subscription access to this journal. Figure files are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.

Contact your librarian or system administrator
or
Login to access Optica Member Subscription

Select as filters


Select Topics Cancel
© Copyright 2024 | Optica Publishing Group. All Rights Reserved