Abstract
Infrared (IR)-blocking filters are crucial for controlling the radiative loading on cryogenic systems and for optimizing the sensitivity of bolometric detectors in the far-IR. We present a new IR filter approach based on a combination of patterned frequency-selective structures on silicon and a thin (25–75 μm thick) absorptive composite based on powdered reststrahlen absorbing materials. For a 300 K blackbody, this combination reflects of the incoming light and blocks of the total power with negligible thermal gradients and excellent low-frequency transmission. This allows a reduction in the IR thermal loading to negligible levels in a single cold filter. These composite filters are fabricated on silicon substrates, which provide excellent thermal transport laterally through the filter and ensure that the entire area of the absorptive filter stays near the bath temperature. A metamaterial antireflection coating cut into these substrates reduces in-band reflections to below 1%, and the in-band absorption of the powder mix is below 1% for signal bands below 750 GHz. This type of filter can be directly incorporated into silicon refractive optical elements.
© 2017 Optical Society of America
Full Article | PDF ArticleMore Like This
Joseph E. Golec, Shreya Sutariya, Rebecca Jackson, Jerry Zimmerman, Simon R. Dicker, Jeffrey Iuliano, Jeff McMahon, Giuseppe Puglisi, Carole Tucker, and Edward J. Wollack
Appl. Opt. 61(30) 8904-8911 (2022)
Oliver Jeong, Richard Plambeck, Christopher Raum, Aritoki Suzuki, and Adrian T. Lee
Appl. Opt. 62(6) 1628-1634 (2023)
Yuki Inoue, Takaho Hamada, Masaya Hasegawa, Masashi Hazumi, Yasuto Hori, Aritoki Suzuki, Takayuki Tomaru, Tomotake Matsumura, Toshifumi Sakata, Tomoyuki Minamoto, and Tohru Hirai
Appl. Opt. 55(34) D22-D28 (2016)