Abstract

The 3D measurement system based on fringe patterns is widely applied in diverse fields. The measurement accuracy is mainly determined by camera and projector calibration accuracy. In the existing methods, the system is calibrated by a dot calibration board with traditional image process algorithms. In this paper, an improved calibration method is proposed to increase camera and projector calibration accuracy simultaneously. To this end, first, a subpixel edge detection method is proposed to improve the detection accuracy of reference features for coarse calibration; second, an iterative compensation algorithm is developed to improve the detection accuracy of the reference feature centers for fine calibration. The experimental results demonstrate that the proposed calibration method can improve the calibration accuracy and measurement accuracy.

© 2016 Optical Society of America

Accurate calibration method for a fringe projection system by projecting an adaptive fringe pattern

Andrés Gonzalez and Jaime Meneses
Appl. Opt. 58(17) 4610-4615 (2019)

Easy-to-operate calibration method for structured light systems

Rui Chen, Jing Xu, Zhiling Ye, Jiadi Li, Yong Guan, and Ken Chen
Appl. Opt. 55(30) 8478-8485 (2016)

Accurate projector calibration based on a new point-to-point mapping relationship between the camera and projector images

Zhengrong Huang, Jiangtao Xi, Yanguang Yu, and Qinghua Guo
Appl. Opt. 54(3) 347-356 (2015)

Accurate calibration for fringe projection profilometry based on an improved subpixel mapping with local gray distribution

Bin Liu, Xinxin He, Chunliu Wang, Sen Wang, and Guanhao Wu
J. Opt. Soc. Am. A 40(12) 2164-2176 (2023)

Calibration method for projector-camera-based telecentric fringe projection profilometry system

Haibo Liu, Huijing Lin, and Linshen Yao
Opt. Express 25(25) 31492-31508 (2017)