Add to BibSonomyAbstract
This paper discusses the pulse signal of a highly sensitive lateral deformable optical microelectromechanical systems (MEMS) displacement sensor based on Wood’s anomalies and its corresponding tolerance. The optical reflection amplitude of the device changes with the displacement of the nanostructured grating elements. Unexpectedly, the device’s original sinusoidal signal develops into a new signal form (i.e., a pulse signal), when the air gap between the two layers of gratings decreases. Since the slope of the pulse signal, namely 2.5%/nm (i.e., 0.65 dB/nm), is eight times higher than that of the original signal form, namely 0.3%/nm (i.e., 0.03 dB/nm), the sensitivity of the structure improves by eight times. However, this device is very sensitive to parameters such as its wavelength, period, duty ratio, and air gap. In this paper we used rigorous coupled wavelength analysis (RCWA) to analyze and optimize the respective influence of each parameter on the device’s performance. We have introduced two methods to search for the optimal setting and have demonstrated the optimal settings of different incident lights. The simulation results indicate that it is close to 85% possible to achieve an actual device with the highest slope superior to 0.5%/nm and it is 64% possible that the highest slope of an actual device falls in the interval ranging from 1.0%/nm to 2.0%/nm. All the simulated data helped us better understand the tolerance of the pulse signal and guide us toward the development of an actual device.
© 2015 Optical Society of America
Full Article | PDF ArticleMore Like This
Dustin W. Carr, J. P. Sullivan, and T. A. Friedmann
Opt. Lett. 28(18) 1636-1638 (2003)
Mengwei Li, Hao Geng, Qiannan Wu, Rui Zhang, Yueping Han, and Gao Wang
Appl. Opt. 57(13) 3438-3443 (2018)
Liming Jin, Ce Wang, Li Jin, Wenqing Chen, Haodong Xu, Min Cui, and Mengwei Li
Appl. Opt. 61(18) 5386-5391 (2022)