Abstract

This work describes a process for measuring thin film steps, using phase shifting interferometry (PSI). The phase shifts are applied only in the region where the thin film steps are located. The phase shift is achieved by displaying different gray levels on a spatial light modulator (SLM Holoeye LC2012) placed in one arm of a Twyman–Green (T–G) interferometer. Before measuring the thin film steps, it was necessary to quantify the phase shifts achieved with this SLM by measuring the fringe shifts in experimental interferograms. The phase shifts observed in the interference patterns were produced by displaying the different gray levels on the SLM one by one, from 0 to 255. The experimental interferograms and the thicknesses of the thin film steps were successfully quantified, proving that this method can be used to measure thin films by applying the PSI method only on the region occupied by them.

© 2015 Optical Society of America

Phase shifting and phase retrieval with a fully automated laser diode system

Uriel Rivera-Ortega, Joris Dirckx, and Cruz Meneses-Fabian
Appl. Opt. 54(33) 9896-9901 (2015)

On–off laser diode control for phase retrieval in phase-shifting interferometry

Uriel Rivera-Ortega and Joris Dirckx
Appl. Opt. 54(12) 3576-3579 (2015)

Smartphone-based platform optical setup measuring π/256 optical phase difference in an interference process

Iftak Hussain and Pabitra Nath
Appl. Opt. 54(18) 5739-5742 (2015)

Phase shifting by wavelength modulation in a cube beam splitter interferometer

Uriel Rivera-Ortega
Appl. Opt. 56(12) 3543-3546 (2017)

Vibratory strain field measurement by transverse digital holography

Karl A. Stetson
Appl. Opt. 54(27) 8207-8211 (2015)