Long-term stable device for tuning fiber Bragg gratings

Abstract

It is demonstrated that with a proper choice of embedding material, the composite beam bending method constitutes an effective and reliable approach for tuning fiber Bragg gratings. A long-term stable device is presented with a dynamic range of $80\mathrm{nm}$, which exhibits insertion losses smaller than $0.28\mathrm{dB}$ and small variations of the full width at half-maximum.

© 2007 Optical Society of America

Purely axial compression of fiber Bragg gratings embedded in a highly deformable polymer

E. Bélanger, M. Bernier, J. P. Bérubé, S. Gagnon, D. Côté, and R. Vallée
Appl. Opt. 47(5) 652-655 (2008)

Fabrication of a widely tunable fiber Bragg grating filter using fused deposition modeling 3D printing

Chunxin Liu, Xiong Yang, Fredrik Laurell, and Michael Fokine
Opt. Mater. Express 9(11) 4409-4417 (2019)

Analysis of tuning of Bragg wavelength of photowritten fiber Bragg gratings during the inscription process using a biprism

Srikanth Gurram and Ashish Kumar Nath
Appl. Opt. 46(12) 2197-2204 (2007)

State-of-strain evaluation with fiber Bragg grating rosettes: application to discrimination between strain and temperature effects in fiber sensors

Sylvain Magne, Stéphane Rougeault, Manuel Vilela, and Pierre Ferdinand
Appl. Opt. 36(36) 9437-9447 (1997)

Development of regenerated fiber Bragg grating sensors with long-term stability

Mert Celikin, David Barba, Binod Bastola, Andreas Ruediger, and Federico Rosei
Opt. Express 24(19) 21897-21909 (2016)