Abstract
A nonmechanical scanning Mirau-type spectral interference microscope has been developed for the measurement of three-dimensional surface profiles of discontinuous objects. An acousto-optic tunable filter (AOTF) is used as a high-resolution spectral filter, which scans the optical frequency of the broadband light emitted from a superluminescent diode. To generate spectral fringes that make full use of the limited coherence length of the filtered light we unbalanced the Mirau interferometric system by positioning the reference mirror nearly halfway between the top and the bottom of the step height. When the frequency of the broadband light source is scanned by an AOTF, the interference fringes move in opposite directions on the top and the bottom of the object. To uniquely determine the sign of the fringe movement over the large area of the object, we developed a three-dimensional Fourier-transform technique, and from the detected sign of the fringe movement and phase information, we determined the three-dimensional step height. Experimental results of the measurement of 100-μm step height are presented. The main advantages of the proposed system are that it provides nonmechanical scanning and a large measurement range without ambiguity in the sign of the phase.
© 2003 Optical Society of America
Full Article | PDF ArticleMore Like This
Dalip Singh Mehta, Hideki Hinosugi, Shohei Saito, Mitsuo Takeda, Takashi Kurokawa, Hideki Takahashi, Masahito Ando, Masataka Shishido, and Tetsuo Yoshizawa
Appl. Opt. 42(4) 682-690 (2003)
Dalip Singh Mehta, Masaya Sugai, Hideki Hinosugi, Shohei Saito, Mitsuo Takeda, Takashi Kurokawa, Hideki Takahashi, Masahito Ando, Masataka Shishido, and Tetsuo Yoshizawa
Appl. Opt. 41(19) 3874-3885 (2002)
Dalip Singh Mehta, Satish Kumar Dubey, Chandra Shakher, and Mitsuo Takeda
Appl. Opt. 45(29) 7602-7609 (2006)