Abstract

The output beam profile of a laser diode with weak-to-moderate levels of optical feedback is shown to arise from interference of the emitted and feedback fields. This has been determined from a series of experiments, that measure the output spatial beam profile as the optical feedback field into the laser diode is spatially manipulated. Tilting, focusing, and aperturing the feedback field led to output beam profiles readily interpreted as the interference between the emitted and the feedback fields, provided the output of the laser-diode system with optical feedback has sufficient temporal coherence. Observation of the interference pattern in the spatial beam profile, at an appropriate level of optical feedback, can be used to study the relative wave front of the optical feedback and emitted fields and to estimate coupling coefficients.

© 2001 Optical Society of America

External-cavity diode lasers with different devices and collimating optics

D. M. Kane and A. P. Willis
Appl. Opt. 34(21) 4316-4325 (1995)

Surface profilometry with laser-diode optical feedback interferometer outside optical benches

Jiyuan Liu and Ichirou Yamaguchi
Appl. Opt. 39(1) 104-107 (2000)

Investigation of the influence of spatial coherence of a broad-area laser diode on the interference fringe system of a Mach–Zehnder interferometer for highly spatially resolved velocity measurements

Lars Büttner and Jürgen Czarske
Appl. Opt. 44(9) 1582-1590 (2005)

Wavelength tuning and spectral properties of distributed feedback diode lasers with a short external optical cavity

Christian K. Laue, Ralf Knappe, Klaus-Jochen Boller, and Richard Wallenstein
Appl. Opt. 40(18) 3051-3059 (2001)

Interference fringes in the far field of short-external-cavity InGaAsP diode lasers: a method for longitudinal mode control

Brian F. Ventrudo and Daniel T. Cassidy
Appl. Opt. 32(33) 6620-6627 (1993)