Abstract

An integrated optical polarization splitter has been fabricated by utilizing the photobleaching-induced birefringence in an azo dye polymer. It consists of a Y-branch waveguide formed by the reactive ion etching with one of the two arms photobleached. The refractive index of the photobleached arm is decreased for the TE mode and increased for the TM mode. The performance of the splitter was measured as a function of the energy of the photobleaching beam and compared to a wave propagation simulation of the device. The measured cross talks are less than -28 dB for the TM mode and -24 dB for the TE mode at a wavelength of 1310 nm. The measured excess losses for the TE and TM modes, which measure the effect of the Y branch and the photobleaching, are 0.3 and 0.4 dB, respectively. The insertion loss was 5 dB, which includes the input fiber to waveguide coupling loss.

© 1999 Optical Society of America

Full Article  |  PDF Article
OSA Recommended Articles
Cross-linkable bromo-fluorinated poly(arylene ether ketone)s for photonic device applications

Yinghua Qi, Jia Jiang, Claire L. Callender, Michael Day, and Jianfu Ding
Appl. Opt. 45(28) 7480-7487 (2006)

A novel scheme for 1√óN optical power splitter

Xionggui Tang, Jinkun Liao, Heping Li, Lin Zhang, Rongguo Lu, and Yongzhi Liu
Opt. Express 18(21) 21697-21704 (2010)

Thermo-optical static and dynamic analysis of a digital optical switch based on amorphous silicon waveguide

M. Iodice, G. Mazzi, and L. Sirleto
Opt. Express 14(12) 5266-5278 (2006)

References

You do not have subscription access to this journal. Citation lists with outbound citation links are available to subscribers only. You may subscribe either as an OSA member, or as an authorized user of your institution.

Contact your librarian or system administrator
or
Login to access OSA Member Subscription

Cited By

You do not have subscription access to this journal. Cited by links are available to subscribers only. You may subscribe either as an OSA member, or as an authorized user of your institution.

Contact your librarian or system administrator
or
Login to access OSA Member Subscription

Figures (4)

You do not have subscription access to this journal. Figure files are available to subscribers only. You may subscribe either as an OSA member, or as an authorized user of your institution.

Contact your librarian or system administrator
or
Login to access OSA Member Subscription

Metrics

You do not have subscription access to this journal. Article level metrics are available to subscribers only. You may subscribe either as an OSA member, or as an authorized user of your institution.

Contact your librarian or system administrator
or
Login to access OSA Member Subscription