Abstract

Transmission of light through the corners in hollow light guides is compared for a new type of corner that is based on a laser-cut light-deflecting panel and for a flat, 45°, mirror-type corner. Corner efficiency is defined, and an experimental method for the measurement of the corner efficiency versus the angular width of the input light is described. Measured corner efficiencies were found to be nearly independent of the angular width of the incident light for metallic hollow light guides, with the average efficiency of the laser-cut-panel corner (65%) lower than that of the mirror corner (80%).

© 1995 Optical Society of America

Calibration method of the right-angle error of a hollow corner-cube retroreflector based on an independent autocollimator

Renpu Li, Yujia Huo, Juan Yan, Dandan Wen, Igor Konyakhin, Dinhduan Dang, Xingye Zhou, Guifu Huang, and Yong Ma
Appl. Opt. 63(3) 668-675 (2024)

Shearing Interferometers for Testing Corner Cubes and Right Angle Prisms

D. Sen and P. N. Puntambekar
Appl. Opt. 5(6) 1009-1014 (1966)

Angle measurement based on the internal-reflection effect and the use of right-angle prisms

P. S. Huang and J. Ni
Appl. Opt. 34(22) 4976-4981 (1995)

Right angle bends in light pipes: analysis

M. D. Wagh and B. V. Rao
Appl. Opt. 15(5) 1331-1333 (1976)

Orthogonal incidence method for efficient sunlight collection from asymmetric light couplers in tree-structured light guiding systems

Wei-Feng Hsu, Yun-Chiang Hsu, and Yi-Ta Shen
Appl. Opt. 52(25) 6332-6343 (2013)