Abstract

The cause of measurement error in refractive-index profiling by the focusing method is investigated by comparison of intensity distributions and reconstructed refractive-index profiles obtained by the experiment, ray tracing, and diffraction integral. It is shown that the variations of intensity distribution and refractive-index profile experimentally obtained are between those obtained by ray tracing and diffraction integral. Therefore, the focusing method based on ray optics generates a great deal of the measurement error for the small size fiber sample due to the diffraction. In particular, the diffraction produced by the index depression of the MCVD fiber causes much degradation of the measurement accuracy not only in the reconstruction of the index depression but also in that of the whole refractive-index profile.

© 1988 Optical Society of America

Error analysis of the focusing method for optical fiber and preform refractive-index profile measurement

D. H. Irving, T. W. Whitbread, and C. J. E. Phillips
Appl. Opt. 24(19) 3128-3133 (1985)

Focusing method for nondestructive measurement of optical fiber index profiles

D. Marcuse and H. M. Presby
Appl. Opt. 18(1) 14-22 (1979)

Refractive index determination by the focusing method

D. Marcuse
Appl. Opt. 18(1) 9-13 (1979)

Nondestructive measurement of refractive-index profile and cross-sectional geometry of optical fiber preforms

C. Saekeang, P. L. Chu, and T. W. Whitbread
Appl. Opt. 19(12) 2025-2030 (1980)

Refractive-index profiling of preform rods by a photoelastic method: application to VAD single-mode fiber preforms

N. Shibata, Masao Kawachi, and Takao Edahiro
Appl. Opt. 21(19) 3507-3510 (1982)