Abstract

No abstract available.

Full Article  |  PDF Article

References

  • View by:
  • |
  • |
  • |

  1. B. S. Kawasaki, K. O. Hill, R. G. Lamont, “Biconical-Taper Single-Mode Fiber Coupler,” Opt. Lett. 6, 327 (1981).
    [CrossRef] [PubMed]
  2. K. O. Hill, D. C. Johnson, R. G. Lamont, “Efficient Coupling-Ratio Control in Single-Mode-Fiber Biconical-Taper Couplers,” in Technical Digest, Conference on Optical Fiber Communication (Optical Society of America, Washington, DC, 1984), paper WE2.
  3. J. Bures, S. Lacroix, J. Lapierre, “Analyse d’un coupleur bidirectional à fibres optiques monomodes fusionnées,” Appl. Opt. 23, 1918 (1983).
    [CrossRef]
  4. R. G. Lamont, D. C. Johnson, K. O. Hill, “Power Transfer in Fused Biconical-Taper Single-Mode Fiber Couplers: Dependence on External Refractive Index,” Appl. Opt. 24, 327 (1985).
    [CrossRef] [PubMed]
  5. K. O. Hill, D. C. Johnson, R. G. Lamont, “Wavelength Dependence in Fused Biconical Taper Splitters: Measurement and Control,” in Technical Digest, Fifth International Conference on Integrated Optics and Optical Fiber Communications, Eleventh European Conference on Optical Communications, Venice (Instituto Internazionale Delle Comunicazioni, Genova, Italy, 1985), Vol. 1, p. 567.
  6. F. P. Payne, C. D. Hussey, M. S. Yataki, “Modelling Fused Single-Mode-Fibre Couplers,” Electron. Lett. 21, 461 (1985).
  7. A. W. Snyder, “Polarising Beamsplitter From Fused-Taper Couplers,” Electron. Lett. 21, 623 (1985).
    [CrossRef]
  8. M. S. Yataki, M. P. Varnham, D. N. Payne, “Fabrication and Properties of Very-Long Fused-Taper Couplers,” in Technical Digest, Conference on Optical Fiber Communication (Optical Society of America, Washington, DC, 1985), paper WK3.
  9. C. M. Lawson, P. M. Kopera, T. Y. Hsu, V. P. Tekippe, “Inline Single-Mode Wavelength Division Multiplexer/Demultiplexer,” Electron. Lett. 20, 963 (1984).
    [CrossRef]
  10. B. S. Kawasaki, M. Kawachi, K. O. Hill, D. C. Johnson, “A Single-Mode-Fiber Coupler with a Variable Coupling Ratio,” IEEE/OSA J. Lightwave Technol. LT-1, 176 (1983).
    [CrossRef]
  11. H. A. Roberts, “Single Mode Fused Wavelength Division Multiplexer,” Proc. Soc. Photo-Opt. Instrum. Eng. 574, 100 (1985).
  12. D. T. Cassidy, D. C. Johnson, K. O. Hill, “Wavelength Dependent Transmission of Monomode Optical Fiber Tapers,” Appl. Opt. 24, 945 (1985).
    [CrossRef] [PubMed]
  13. W. J. Stewart, J. D. Love, “Design Limitation on Tapers and Couplers in Single Mode Fibers,” in Technical Digest, Fifth International Conference on Integrated Optics and Optical Fibre Communications, Eleventh European Conference on Optical Communications, Venice (Instituto Internazionale Delle Comunicazioni, Genova, Italy, 1985), Vol. 1, p. 559.

1985 (5)

R. G. Lamont, D. C. Johnson, K. O. Hill, “Power Transfer in Fused Biconical-Taper Single-Mode Fiber Couplers: Dependence on External Refractive Index,” Appl. Opt. 24, 327 (1985).
[CrossRef] [PubMed]

F. P. Payne, C. D. Hussey, M. S. Yataki, “Modelling Fused Single-Mode-Fibre Couplers,” Electron. Lett. 21, 461 (1985).

A. W. Snyder, “Polarising Beamsplitter From Fused-Taper Couplers,” Electron. Lett. 21, 623 (1985).
[CrossRef]

H. A. Roberts, “Single Mode Fused Wavelength Division Multiplexer,” Proc. Soc. Photo-Opt. Instrum. Eng. 574, 100 (1985).

D. T. Cassidy, D. C. Johnson, K. O. Hill, “Wavelength Dependent Transmission of Monomode Optical Fiber Tapers,” Appl. Opt. 24, 945 (1985).
[CrossRef] [PubMed]

1984 (1)

C. M. Lawson, P. M. Kopera, T. Y. Hsu, V. P. Tekippe, “Inline Single-Mode Wavelength Division Multiplexer/Demultiplexer,” Electron. Lett. 20, 963 (1984).
[CrossRef]

1983 (2)

B. S. Kawasaki, M. Kawachi, K. O. Hill, D. C. Johnson, “A Single-Mode-Fiber Coupler with a Variable Coupling Ratio,” IEEE/OSA J. Lightwave Technol. LT-1, 176 (1983).
[CrossRef]

J. Bures, S. Lacroix, J. Lapierre, “Analyse d’un coupleur bidirectional à fibres optiques monomodes fusionnées,” Appl. Opt. 23, 1918 (1983).
[CrossRef]

1981 (1)

Bures, J.

J. Bures, S. Lacroix, J. Lapierre, “Analyse d’un coupleur bidirectional à fibres optiques monomodes fusionnées,” Appl. Opt. 23, 1918 (1983).
[CrossRef]

Cassidy, D. T.

Hill, K. O.

D. T. Cassidy, D. C. Johnson, K. O. Hill, “Wavelength Dependent Transmission of Monomode Optical Fiber Tapers,” Appl. Opt. 24, 945 (1985).
[CrossRef] [PubMed]

R. G. Lamont, D. C. Johnson, K. O. Hill, “Power Transfer in Fused Biconical-Taper Single-Mode Fiber Couplers: Dependence on External Refractive Index,” Appl. Opt. 24, 327 (1985).
[CrossRef] [PubMed]

B. S. Kawasaki, M. Kawachi, K. O. Hill, D. C. Johnson, “A Single-Mode-Fiber Coupler with a Variable Coupling Ratio,” IEEE/OSA J. Lightwave Technol. LT-1, 176 (1983).
[CrossRef]

B. S. Kawasaki, K. O. Hill, R. G. Lamont, “Biconical-Taper Single-Mode Fiber Coupler,” Opt. Lett. 6, 327 (1981).
[CrossRef] [PubMed]

K. O. Hill, D. C. Johnson, R. G. Lamont, “Efficient Coupling-Ratio Control in Single-Mode-Fiber Biconical-Taper Couplers,” in Technical Digest, Conference on Optical Fiber Communication (Optical Society of America, Washington, DC, 1984), paper WE2.

K. O. Hill, D. C. Johnson, R. G. Lamont, “Wavelength Dependence in Fused Biconical Taper Splitters: Measurement and Control,” in Technical Digest, Fifth International Conference on Integrated Optics and Optical Fiber Communications, Eleventh European Conference on Optical Communications, Venice (Instituto Internazionale Delle Comunicazioni, Genova, Italy, 1985), Vol. 1, p. 567.

Hsu, T. Y.

C. M. Lawson, P. M. Kopera, T. Y. Hsu, V. P. Tekippe, “Inline Single-Mode Wavelength Division Multiplexer/Demultiplexer,” Electron. Lett. 20, 963 (1984).
[CrossRef]

Hussey, C. D.

F. P. Payne, C. D. Hussey, M. S. Yataki, “Modelling Fused Single-Mode-Fibre Couplers,” Electron. Lett. 21, 461 (1985).

Johnson, D. C.

R. G. Lamont, D. C. Johnson, K. O. Hill, “Power Transfer in Fused Biconical-Taper Single-Mode Fiber Couplers: Dependence on External Refractive Index,” Appl. Opt. 24, 327 (1985).
[CrossRef] [PubMed]

D. T. Cassidy, D. C. Johnson, K. O. Hill, “Wavelength Dependent Transmission of Monomode Optical Fiber Tapers,” Appl. Opt. 24, 945 (1985).
[CrossRef] [PubMed]

B. S. Kawasaki, M. Kawachi, K. O. Hill, D. C. Johnson, “A Single-Mode-Fiber Coupler with a Variable Coupling Ratio,” IEEE/OSA J. Lightwave Technol. LT-1, 176 (1983).
[CrossRef]

K. O. Hill, D. C. Johnson, R. G. Lamont, “Wavelength Dependence in Fused Biconical Taper Splitters: Measurement and Control,” in Technical Digest, Fifth International Conference on Integrated Optics and Optical Fiber Communications, Eleventh European Conference on Optical Communications, Venice (Instituto Internazionale Delle Comunicazioni, Genova, Italy, 1985), Vol. 1, p. 567.

K. O. Hill, D. C. Johnson, R. G. Lamont, “Efficient Coupling-Ratio Control in Single-Mode-Fiber Biconical-Taper Couplers,” in Technical Digest, Conference on Optical Fiber Communication (Optical Society of America, Washington, DC, 1984), paper WE2.

Kawachi, M.

B. S. Kawasaki, M. Kawachi, K. O. Hill, D. C. Johnson, “A Single-Mode-Fiber Coupler with a Variable Coupling Ratio,” IEEE/OSA J. Lightwave Technol. LT-1, 176 (1983).
[CrossRef]

Kawasaki, B. S.

B. S. Kawasaki, M. Kawachi, K. O. Hill, D. C. Johnson, “A Single-Mode-Fiber Coupler with a Variable Coupling Ratio,” IEEE/OSA J. Lightwave Technol. LT-1, 176 (1983).
[CrossRef]

B. S. Kawasaki, K. O. Hill, R. G. Lamont, “Biconical-Taper Single-Mode Fiber Coupler,” Opt. Lett. 6, 327 (1981).
[CrossRef] [PubMed]

Kopera, P. M.

C. M. Lawson, P. M. Kopera, T. Y. Hsu, V. P. Tekippe, “Inline Single-Mode Wavelength Division Multiplexer/Demultiplexer,” Electron. Lett. 20, 963 (1984).
[CrossRef]

Lacroix, S.

J. Bures, S. Lacroix, J. Lapierre, “Analyse d’un coupleur bidirectional à fibres optiques monomodes fusionnées,” Appl. Opt. 23, 1918 (1983).
[CrossRef]

Lamont, R. G.

R. G. Lamont, D. C. Johnson, K. O. Hill, “Power Transfer in Fused Biconical-Taper Single-Mode Fiber Couplers: Dependence on External Refractive Index,” Appl. Opt. 24, 327 (1985).
[CrossRef] [PubMed]

B. S. Kawasaki, K. O. Hill, R. G. Lamont, “Biconical-Taper Single-Mode Fiber Coupler,” Opt. Lett. 6, 327 (1981).
[CrossRef] [PubMed]

K. O. Hill, D. C. Johnson, R. G. Lamont, “Efficient Coupling-Ratio Control in Single-Mode-Fiber Biconical-Taper Couplers,” in Technical Digest, Conference on Optical Fiber Communication (Optical Society of America, Washington, DC, 1984), paper WE2.

K. O. Hill, D. C. Johnson, R. G. Lamont, “Wavelength Dependence in Fused Biconical Taper Splitters: Measurement and Control,” in Technical Digest, Fifth International Conference on Integrated Optics and Optical Fiber Communications, Eleventh European Conference on Optical Communications, Venice (Instituto Internazionale Delle Comunicazioni, Genova, Italy, 1985), Vol. 1, p. 567.

Lapierre, J.

J. Bures, S. Lacroix, J. Lapierre, “Analyse d’un coupleur bidirectional à fibres optiques monomodes fusionnées,” Appl. Opt. 23, 1918 (1983).
[CrossRef]

Lawson, C. M.

C. M. Lawson, P. M. Kopera, T. Y. Hsu, V. P. Tekippe, “Inline Single-Mode Wavelength Division Multiplexer/Demultiplexer,” Electron. Lett. 20, 963 (1984).
[CrossRef]

Love, J. D.

W. J. Stewart, J. D. Love, “Design Limitation on Tapers and Couplers in Single Mode Fibers,” in Technical Digest, Fifth International Conference on Integrated Optics and Optical Fibre Communications, Eleventh European Conference on Optical Communications, Venice (Instituto Internazionale Delle Comunicazioni, Genova, Italy, 1985), Vol. 1, p. 559.

Payne, D. N.

M. S. Yataki, M. P. Varnham, D. N. Payne, “Fabrication and Properties of Very-Long Fused-Taper Couplers,” in Technical Digest, Conference on Optical Fiber Communication (Optical Society of America, Washington, DC, 1985), paper WK3.

Payne, F. P.

F. P. Payne, C. D. Hussey, M. S. Yataki, “Modelling Fused Single-Mode-Fibre Couplers,” Electron. Lett. 21, 461 (1985).

Roberts, H. A.

H. A. Roberts, “Single Mode Fused Wavelength Division Multiplexer,” Proc. Soc. Photo-Opt. Instrum. Eng. 574, 100 (1985).

Snyder, A. W.

A. W. Snyder, “Polarising Beamsplitter From Fused-Taper Couplers,” Electron. Lett. 21, 623 (1985).
[CrossRef]

Stewart, W. J.

W. J. Stewart, J. D. Love, “Design Limitation on Tapers and Couplers in Single Mode Fibers,” in Technical Digest, Fifth International Conference on Integrated Optics and Optical Fibre Communications, Eleventh European Conference on Optical Communications, Venice (Instituto Internazionale Delle Comunicazioni, Genova, Italy, 1985), Vol. 1, p. 559.

Tekippe, V. P.

C. M. Lawson, P. M. Kopera, T. Y. Hsu, V. P. Tekippe, “Inline Single-Mode Wavelength Division Multiplexer/Demultiplexer,” Electron. Lett. 20, 963 (1984).
[CrossRef]

Varnham, M. P.

M. S. Yataki, M. P. Varnham, D. N. Payne, “Fabrication and Properties of Very-Long Fused-Taper Couplers,” in Technical Digest, Conference on Optical Fiber Communication (Optical Society of America, Washington, DC, 1985), paper WK3.

Yataki, M. S.

F. P. Payne, C. D. Hussey, M. S. Yataki, “Modelling Fused Single-Mode-Fibre Couplers,” Electron. Lett. 21, 461 (1985).

M. S. Yataki, M. P. Varnham, D. N. Payne, “Fabrication and Properties of Very-Long Fused-Taper Couplers,” in Technical Digest, Conference on Optical Fiber Communication (Optical Society of America, Washington, DC, 1985), paper WK3.

Appl. Opt. (3)

Electron. Lett. (3)

F. P. Payne, C. D. Hussey, M. S. Yataki, “Modelling Fused Single-Mode-Fibre Couplers,” Electron. Lett. 21, 461 (1985).

A. W. Snyder, “Polarising Beamsplitter From Fused-Taper Couplers,” Electron. Lett. 21, 623 (1985).
[CrossRef]

C. M. Lawson, P. M. Kopera, T. Y. Hsu, V. P. Tekippe, “Inline Single-Mode Wavelength Division Multiplexer/Demultiplexer,” Electron. Lett. 20, 963 (1984).
[CrossRef]

IEEE/OSA J. Lightwave Technol. (1)

B. S. Kawasaki, M. Kawachi, K. O. Hill, D. C. Johnson, “A Single-Mode-Fiber Coupler with a Variable Coupling Ratio,” IEEE/OSA J. Lightwave Technol. LT-1, 176 (1983).
[CrossRef]

Opt. Lett. (1)

Proc. Soc. Photo-Opt. Instrum. Eng. (1)

H. A. Roberts, “Single Mode Fused Wavelength Division Multiplexer,” Proc. Soc. Photo-Opt. Instrum. Eng. 574, 100 (1985).

Other (4)

M. S. Yataki, M. P. Varnham, D. N. Payne, “Fabrication and Properties of Very-Long Fused-Taper Couplers,” in Technical Digest, Conference on Optical Fiber Communication (Optical Society of America, Washington, DC, 1985), paper WK3.

K. O. Hill, D. C. Johnson, R. G. Lamont, “Efficient Coupling-Ratio Control in Single-Mode-Fiber Biconical-Taper Couplers,” in Technical Digest, Conference on Optical Fiber Communication (Optical Society of America, Washington, DC, 1984), paper WE2.

K. O. Hill, D. C. Johnson, R. G. Lamont, “Wavelength Dependence in Fused Biconical Taper Splitters: Measurement and Control,” in Technical Digest, Fifth International Conference on Integrated Optics and Optical Fiber Communications, Eleventh European Conference on Optical Communications, Venice (Instituto Internazionale Delle Comunicazioni, Genova, Italy, 1985), Vol. 1, p. 567.

W. J. Stewart, J. D. Love, “Design Limitation on Tapers and Couplers in Single Mode Fibers,” in Technical Digest, Fifth International Conference on Integrated Optics and Optical Fibre Communications, Eleventh European Conference on Optical Communications, Venice (Instituto Internazionale Delle Comunicazioni, Genova, Italy, 1985), Vol. 1, p. 559.

Cited By

OSA participates in CrossRef's Cited-By Linking service. Citing articles from OSA journals and other participating publishers are listed here.

Alert me when this article is cited.


Figures (4)

Fig. 1
Fig. 1

Wavelength dependence of the coupling ratio of a fused biconical coupler with an interaction length one-half of the beat length at 632.8 nm.

Fig. 2
Fig. 2

Wavelength dependence of the coupling ratio of a fused biconical coupler with an interaction length of 2.75 beat lengths at 632.8 nm.

Fig. 3
Fig. 3

Wavelength dependence of the coupling ratio for a fused coupler which is straight and then bent at the coupler waist.

Fig. 4
Fig. 4

Wavelength dependence of the coupling ratio for a splitter that has mode conversion loss in the taper.

Equations (1)

Equations on this page are rendered with MathJax. Learn more.

K 2 / [ K 2 + ( Δ B / 2 ) 2 ] ,

Metrics