Abstract

An example of doublet design using the double-graph technique as described by Kingslake is given. The potential of the double-graph technique is evaluated by applying it to three different cases of doublet design. The technique in its present form is found to give a solution only in one case. In the other two cases the solution can be obtained only by modifying the technique.

© 1983 Optical Society of America

Full Article  |  PDF Article

References

  • View by:
  • |
  • |

  1. A. E. Conrady, Applied Optics and Optical Design, Part 1 (Dover, New York, 1957), p. 204.
  2. R. Kingslake, Lens Design Fundamentals (Academic, New York, 1978), p. 123.
  3. R. Kingslake, U. Rochester; private communication.

Conrady, A. E.

A. E. Conrady, Applied Optics and Optical Design, Part 1 (Dover, New York, 1957), p. 204.

Kingslake, R.

R. Kingslake, U. Rochester; private communication.

R. Kingslake, Lens Design Fundamentals (Academic, New York, 1978), p. 123.

Other (3)

A. E. Conrady, Applied Optics and Optical Design, Part 1 (Dover, New York, 1957), p. 204.

R. Kingslake, Lens Design Fundamentals (Academic, New York, 1978), p. 123.

R. Kingslake, U. Rochester; private communication.

Cited By

OSA participates in CrossRef's Cited-By Linking service. Citing articles from OSA journals and other participating publishers are listed here.

Alert me when this article is cited.


Figures (7)

Fig. 1
Fig. 1

Aberration plots, Kingslake’s example (ΔC = 0.002).

Fig. 2.A
Fig. 2.A

Aberration plots, system 1 (ΔC = 0.002).

Fig. 2.B
Fig. 2.B

Aberration plots, system 1 (ΔC = −0.005).

Fig. 3.A
Fig. 3.A

Aberration plots, system 2 (ΔC = 0.002).

Fig. 3.B
Fig. 3.B

Aberration plots, system 2 (ΔC = −0.005).

Fig. 4.A
Fig. 4.A

Aberration plots, system 3 (ΔC = 0.002).

Fig. 4.B
Fig. 4.B

Aberration plots, system 3 (ΔC = −0.005).

Tables (14)

Tables Icon

Table 1.1 Design Data for Kingslake’s (Setup A) System

Tables Icon

Table 1.2 Aberration Values for Setups A, B, and C

Tables Icon

Table 1.3 Design Data for Kingslake’s Final System

Tables Icon

Table 2.1 Design Data for System 1 Setup A

Tables Icon

Table 3.1 Design Data for System 2 Setup A

Tables Icon

Table 4.1 Design Data for System 3 Setup A

Tables Icon

Table 2.2.A. Aberration Values of System 1 (ΔC = 0.002)

Tables Icon

Table 2.3.A. Design Data for Solution for System 1 (ΔC = 0.002)

Tables Icon

Table 3.2.A. Aberration Values for System 2 (ΔC = 0.002)

Tables Icon

Table 4.2.A Aberration Values for System 3 (ΔC = 0.002)

Tables Icon

Table 2.2.B Aberration Values for System 1 (ΔC = −0.005)

Tables Icon

Table 2.3.B Design Data for Solution for System 1 (ΔC = −0.005)

Tables Icon

Table 3.2.B. Aberration Values of System 2 (ΔC = −0.005)

Tables Icon

Table 4.2.B. Aberration Values for System 3 (ΔC = −0.005)

Metrics