Abstract

No abstract available.

Full Article  |  PDF Article

References

  • View by:
  • |
  • |
  • |

  1. Y. Fujii, J. Minowa, T. Aoyama, K. Doi, Electron. Lett. 15, 427 (1979).
    [Crossref]
  2. R. E. Wagner, J. Cheng, Appl. Opt. 19, 2921 (1980).
    [Crossref] [PubMed]
  3. R. A. Soref, D. H. McMahon, Opt. Lett. 5, 147 (1980).
    [Crossref] [PubMed]
  4. W. B. Spillman, R. L. Gravel, R. A. Soref, Appl. Opt. 17, 3822 (1978).
    [Crossref] [PubMed]
  5. From EOTEC Corp., 200 Frontage Rd., West Haven, Conn. 06516.
  6. J. B. Price, in Semicon. Silicon 1973, H. R. Huff, R. B. Burgess, Eds. (Electrochem Soc., Princeton, N.J., 1973), pp. 339–353.
  7. K. Ogawa, Bell Syst. Tech. J. 5, 729 (1977).

1980 (2)

1979 (1)

Y. Fujii, J. Minowa, T. Aoyama, K. Doi, Electron. Lett. 15, 427 (1979).
[Crossref]

1978 (1)

1977 (1)

K. Ogawa, Bell Syst. Tech. J. 5, 729 (1977).

Aoyama, T.

Y. Fujii, J. Minowa, T. Aoyama, K. Doi, Electron. Lett. 15, 427 (1979).
[Crossref]

Cheng, J.

Doi, K.

Y. Fujii, J. Minowa, T. Aoyama, K. Doi, Electron. Lett. 15, 427 (1979).
[Crossref]

Fujii, Y.

Y. Fujii, J. Minowa, T. Aoyama, K. Doi, Electron. Lett. 15, 427 (1979).
[Crossref]

Gravel, R. L.

McMahon, D. H.

Minowa, J.

Y. Fujii, J. Minowa, T. Aoyama, K. Doi, Electron. Lett. 15, 427 (1979).
[Crossref]

Ogawa, K.

K. Ogawa, Bell Syst. Tech. J. 5, 729 (1977).

Price, J. B.

J. B. Price, in Semicon. Silicon 1973, H. R. Huff, R. B. Burgess, Eds. (Electrochem Soc., Princeton, N.J., 1973), pp. 339–353.

Soref, R. A.

Spillman, W. B.

Wagner, R. E.

Appl. Opt. (2)

Bell Syst. Tech. J. (1)

K. Ogawa, Bell Syst. Tech. J. 5, 729 (1977).

Electron. Lett. (1)

Y. Fujii, J. Minowa, T. Aoyama, K. Doi, Electron. Lett. 15, 427 (1979).
[Crossref]

Opt. Lett. (1)

Other (2)

From EOTEC Corp., 200 Frontage Rd., West Haven, Conn. 06516.

J. B. Price, in Semicon. Silicon 1973, H. R. Huff, R. B. Burgess, Eds. (Electrochem Soc., Princeton, N.J., 1973), pp. 339–353.

Cited By

OSA participates in Crossref's Cited-By Linking service. Citing articles from OSA journals and other participating publishers are listed here.

Alert me when this article is cited.


Figures (3)

Fig. 1
Fig. 1

Cross section of a thermooptic coupler. The cores of two plastic clad silica fibers are held 2 μm apart by silicon chips.

Fig. 2
Fig. 2

Optical coupling vs electric drive. An experimental plot of the optical power in the main and auxiliary ports, as well as their sum, vs electrical power to the heating resistor. All optical powers are normalized to the input optical power.

Fig. 3
Fig. 3

Far-field output patterns. Far-field patterns of the main (left) and auxiliary (right) outputs of the coupler: (a) maximum coupling point; (b) low but not minimum coupling.

Metrics