Abstract

In this work, fiber Bragg grating (FBG) strain sensors in single and quasi-distributed systems are investigated, seeking high-accuracy measurement. Since FBG-based strain sensors of small lengths are preferred in medical applications, and that causes the full width at half-maximum (FWHM) to be larger, a new apodization profile is introduced for the first time, to the best of our knowledge, with a remarkable FWHM at small sensor lengths compared to the Gaussian and Nuttall profiles, in addition to a higher mainlobe slope at these lengths. A careful selection of apodization profiles with detailed investigation is performed—using sidelobe analysis and the FWHM, which are primary judgment factors especially in a quasi-distributed configuration. A comparison between the elite selection of apodization profiles (extracted from related literature) and the proposed new profile is carried out covering the reflectivity peak, FWHM, and sidelobe analysis. The optimization process concludes that the proposed new profile with a chosen small length ($L$) of 10 mm and $\mathrm{\Delta }{n}_{ac}$ of $1.4\times {10}^{-4}$ is the optimum choice for single stage and quasi-distributed strain-sensor networks, even better than the Gaussian profile at small sensor lengths. The proposed profile achieves the smallest FWHM of 15 GHz (suitable for UDWDM), and the highest mainlobe slope of 130 dB/nm. For the quasi-distributed scenario, a noteworthy high isolation of 6.953 dB is achieved while applying a high strain value of 1500 μstrain (με) for a five-stage strain-sensing network. Further investigation was undertaken, proving that consistency in choosing the apodization profile in the quasi-distributed network is mandatory. A test was made of the inclusion of a uniform apodized sensor among other apodized sensors with the proposed profile in an FBG strain-sensor network.

© 2015 Optical Society of America

Ultra-sensitive quasi-distributed temperature sensor based on an apodized fiber Bragg grating

Nazmi A. Mohammed and Hatem O. El Serafy
Appl. Opt. 57(2) 273-282 (2018)

Amendment performance of an apodized tilted fiber Bragg grating for a quasi-distributed-based sensor

Eman A. Elzahaby, Ishac Kandas, and Moustafa H. Aly
Appl. Opt. 56(19) 5480-5488 (2017)

Performance analysis of a fiber Bragg grating filter-based strain/temperature sensing system based on a modified Gaussian function approximation method

Kuo-Chih Chuang, Chien-Ching Ma, and Chao-Hsiang Wang
Appl. Opt. 50(27) 5243-5255 (2011)

High temperature strain sensor based on a fiber Bragg grating and rhombus metal structure

Liang Zhang, Yueming Liu, Xiaoliang Gao, and Zhongcheng Xia
Appl. Opt. 54(28) E109-E112 (2015)

Numerical model of tapered fiber Bragg gratings for comprehensive analysis and optimization of their sensing and strain-induced tunable dispersion properties

Tomasz Osuch, Konrad Markowski, and Kazimierz Jędrzejewski
Appl. Opt. 54(17) 5525-5533 (2015)