Abstract

Although ideal concentrators such as the compound parabolic concentrator have the property that concentrated flux is uniformly distributed on the absorber when the angular acceptance is filled by the incident flux, the instantaneous flux distribution may be very nonuniform when illuminated by a point source. These nonuniformities may be reduced by texturing the surface with small distortions. The necessary reduction of concentrator throughput is small enough to allow such textured concentrators to accommodate a wide range of tolerances in concentrator efficiency and uniformity of the flux distribution. In particular, the suitability of such concentrators for some space applications is discussed. Results of measurements on a test model are presented that demonstrate the effective reduction of flux nonuniformities by reflectors that have been textured by a simple process. Two-stage concentrators for attaining high concentration ratios are shown to distribute the concentrated flux fairly uniformly across the absorber when illuminated by point sources within the field of view. Again the remaining nonuniformities may be removed by texturing the reflecting surfaces (entailing some reduction in concentrator efficiency).

© 1980 Optical Society of America

Ideal flux field dielectric concentrators

Angel García-Botella
Appl. Opt. 50(28) 5357-5360 (2011)

Optical acceptance function of modified compound parabolic concentrators with linear corrugated reflectors

Mats Rönnelid and Björn Karlsson
Appl. Opt. 37(22) 5222-5226 (1998)

Design of nonimaging concentrators as second stages in tandem with image-forming first-stage concentrators

R. Winston and W. T. Welford
Appl. Opt. 19(3) 347-351 (1980)

On the problem of ideal flux concentrators

W. T. Welford and R. Winston
J. Opt. Soc. Am. 68(4) 531-534 (1978)

Solar concentrator flux distributions using backward ray tracing

J. C. Daly
Appl. Opt. 18(15) 2696-2699 (1979)