Abstract
periodic multilayer high reflection mirrors have been prepared by a reactive electron-beam evaporation technique. The deposited mirrors were annealed in the temperature range from 300°C to 500°C. The effects of annealing on optical, microstructural, and laser-induced damage characteristics of the mirrors have been investigated. The high reflection band of the mirror shifts toward a shorter wavelength with increasing annealing temperature. As-deposited and annealed mirrors show polycrystalline structure with a monoclinic phase of . Crystalinity and grain size increase upon annealing. The laser-induced damage threshold (LIDT) has been assessed using a 532 nm pulsed laser at a pulse width of 7 ns. The LIDT value of the multilayer mirror increases from to with annealing up to 400°C. The improvement of LIDT with annealing is explained through oxygen vacancy defects as well as grain-size-dependent thermal conductivity. Finally, the observed laser damage morphology, such as circular scalds and ablated multilayer stacks with terrace structure, are analyzed.
© 2016 Optical Society of America
Full Article | PDF ArticleMore Like This
Yunti Pu, Ping Ma, Zhao Qiao, Mingxiao Zhang, Zhongwen Lu, Fuming Qiu, and Liang Lv
Opt. Express 24(20) 23044-23051 (2016)
Drew Schiltz, Dinesh Patel, Cory Baumgarten, Brendan A. Reagan, Jorge J. Rocca, and Carmen S. Menoni
Appl. Opt. 56(4) C136-C139 (2017)
Shuvendu Jena, Raj Bahadur Tokas, Nitin M. Kamble, Sudhakar Thakur, and Naba Kishore Sahoo
Appl. Opt. 53(5) 850-860 (2014)