Abstract
A new, to the best of our knowledge, 3D additive manufacturing technique utilizing particle-loaded ink jet printing to fabricate transparent ceramic Yb:YAG planar waveguides for laser gain media was demonstrated. Rheological optimization of YAG particle-loaded inks resulted in successful droplet formation and printing resolution. Planar waveguides composed of a Yb:YAG guide encased in undoped YAG cladding were printed with guide thicknesses ranging between 25 and 350 µm and consolidated to high optical quality via solid-state sintering. Sufficiently low optical (1–3%/cm) and intermodal scatter allowed single-mode propagation with a core/clad index difference of $\Delta {n}\sim{5.0} \times {{10}^{- 4}}$ (corresponding to 3 at.% Yb). The waveguides were cladding-pumped longitudinally with a 940 nm diode array resulting in 23.6% slope efficiency in 2 ms pulsed operation.
© 2021 Optical Society of America
Full Article | PDF ArticleMore Like This
Chaoyang Ma, Jiangfeng Zhu, Kai Liu, Fei Tang, Jiaqi Long, Zicheng Wen, Ran Ma, Xuanyi Yuan, Wang Guo, Junting Li, and Yongge Cao
Opt. Lett. 41(14) 3317-3319 (2016)
Baoquan Yao, Xiaolei Li, Tongyu Dai, Zheng Cui, Shuang Bai, Hongyu Yang, Jiang Li, Youlun Ju, Lin Ge, Yuezhu Wang, and Yubai Pan
Opt. Lett. 41(2) 254-256 (2016)
Lin Ge, Jiang Li, Zhiwei Zhou, Haiyun Qu, Manjiang Dong, Yan Zhu, Tengfei Xie, Wei Li, Min Chen, Huamin Kou, Yun Shi, Yubai Pan, Xiqi Feng, and Jingkun Guo
Opt. Mater. Express 4(5) 1042-1049 (2014)