Abstract

A fiber Bragg grating (FBG) based bend measurement method using an etched fiber is proposed that utilizes the coupling of the core mode to the cladding and radiation modes at the bending region. An etching region of 99 µm diameter that serves as bend sensing head is achieved at 10 mm upstream the FBG through processing in 40% hydrofluoric acid, while the FBG acts as a narrowband reflector to enhance the sensitivity. The power variation curves are obtained for a wide range of bend angles, but the performance is limited due to the presence of the loss peaks. The sensing response is improved by immersing the etching region in a refractive index matching gel. The results are analyzed by using curve fitting formulas and are in good agreement. A large dynamic range of $-27°$ to $+27°$ and sensitivity of $0.43\mathrm{dBm}/\mathrm{deg}$ is achieved, which can be enhanced by reducing the etched diameter.

© 2013 Optical Society of America

High-sensitivity bend angle measurements using optical fiber gratings

Abdul Rauf, Jianlin Zhao, and Biqiang Jiang
Appl. Opt. 52(21) 5072-5078 (2013)

Two-axis bend measurement with Bragg gratings in multicore optical fiber

G. M. H. Flockhart, W. N. MacPherson, J. S. Barton, J. D. C. Jones, L. Zhang, and I. Bennion
Opt. Lett. 28(6) 387-389 (2003)

Off-axis ultraviolet-written fiber Bragg gratings for directional bending measurements

Dingyi Feng, Xueguang Qiao, and Jacques Albert
Opt. Lett. 41(6) 1201-1204 (2016)

Bending insensitive sensors for strain and temperature measurements with Bragg gratings in Bragg fibers

Ningliang Liu, Yuhua Li, Ying Wang, Haiyan Wang, Wenbin Liang, and Peixiang Lu
Opt. Express 19(15) 13880-13891 (2011)

Capturing reflected cladding modes from a fiber Bragg grating with a double-clad fiber coupler

Mohamad Diaa Baiad, Mathieu Gagné, Simon Lemire-Renaud, Etienne De Montigny, Wendy-Julie Madore, Nicolas Godbout, Caroline Boudoux, and Raman Kashyap
Opt. Express 21(6) 6873-6879 (2013)