Expand this Topic clickable element to expand a topic
Skip to content
Optica Publishing Group

Narrow-linewidth fiber laser operating at 1.55 μm

Not Accessible

Your library or personal account may give you access

Abstract

We report the fabrication and operation of an Er3+-doped silica single-mode fiber laser operating at 1.55 μm and using a distributed fiber grating to provide feedback. The output bandwidth was measured as 0.04 nm, significantly narrower than the conventional cavity design. The laser had a threshold of 13 mW and a slope efficiency of 5%.

© 1987 Optical Society of America

Full Article  |  PDF Article
More Like This
Line narrowing and spectral hole burning in single-mode Nd3+-fiber lasers

M. Zürn, J. Voigt, E. Brinkmeyer, R. Ulrich, and S. B. Poole
Opt. Lett. 12(5) 316-318 (1987)

Continuous-wave operation at 2.1 μm of a diode-laser-pumped, Tm-sensitized Ho:Y3Al5O12 laser at 300 K

T. Y. Fan, G. Huber, R. L. Byer, and P. Mitzscherlich
Opt. Lett. 12(9) 678-680 (1987)

Cited By

You do not have subscription access to this journal. Cited by links are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.

Contact your librarian or system administrator
or
Login to access Optica Member Subscription

Figures (4)

You do not have subscription access to this journal. Figure files are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.

Contact your librarian or system administrator
or
Login to access Optica Member Subscription

Select as filters


Select Topics Cancel
© Copyright 2024 | Optica Publishing Group. All Rights Reserved