Abstract

A full resolution autostereoscopic three-dimensional (3D) display prototype is developed. It is composed of a time division thin film transistor liquid crystal display panel with an optical controlled birefringence liquid crystal polarization switch and a polarizer parallax barrier. Fast driving circuits operating at 120-Hz frame rate are fabricated. The 3D images on the display have the same resolution as the corresponding two-dimensional images, which is signi¯cantly different from conventional parallax barrier autostereoscopic 3D displays having degraded 3D image resolution.

© 2010 Chinese Optics Letters

Numerical simulation and experimental verification of a dense multi-view full-resolution autostereoscopic 3D-display-based dynamic shutter parallax barrier

Yang Meng, Zhongyuan Yu, Chunyu Zhang, Ye Wang, Yumin Liu, Han Ye, and Laurence Lujun Chen
Appl. Opt. 58(5) A228-A233 (2019)

Parallax barrier engineering for image quality improvement in an autostereoscopic 3D display

Sung-Kyu Kim, Ki-Hyuk Yoon, Seon Kyu Yoon, and Heongkyu Ju
Opt. Express 23(10) 13230-13244 (2015)

Autostereoscopic three-dimensional display based on two parallax barriers

Jiang-Yong Luo, Qiong-Hua Wang, Wu-Xiang Zhao, and Da-Hai Li
Appl. Opt. 50(18) 2911-2915 (2011)

Phase-polarization parallax barriers for an autostereo/stereo/monoscopic display with full-screen resolution at each operation mode

Vasily Ezhov
Appl. Opt. 54(28) 8306-8312 (2015)

Three-dimensional display based on dual parallax barriers with uniform resolution

Guo-Jiao Lv, Jun Wang, Wu-Xiang Zhao, and Qiong-Hua Wang
Appl. Opt. 52(24) 6011-6015 (2013)