Abstract

The third-harmonic output of a Nd:YAG laser is utilized in the quantitative detection of gas-phase NaOH. Species selectivity and sensitivity are achieved via multiple-photon absorption and photodissociation of NaOH-in combination with monitoring of the subsequent Na photofragment fluorescence. Detection limits of ~ 0.5 ppm of gas-phase NaOH have been achieved under atmospheric conditions. The fluorescence intensity has been found to be proportional to the square of the laser power, which is consistent with a second-order absorption process. Although the technique is less sensitive than the more widely used excimer laser-induced photofragment fluorescence approach, there are many technical advantages which make it more suitable for use in modern coal combustion systems. These combustion systems require accurate alkali measurement and control to combat fouling and corrosion of process surfaces and turbine blades.

Laser-induced fluorescence detection strategies for sodium atoms and compounds in high-pressure combustors

Karen J. Rensberger Weiland, Michael L. Wise, and Gregory P. Smith
Appl. Opt. 32(21) 4066-4073 (1993)

Detection of mercuric chloride by photofragment emission using a frequency-converted fiber amplifier

Alexandra A. Hoops, Thomas A. Reichardt, Dahv. A. V. Kliner, Jeffrey P. Koplow, and Sean W. Moore
Appl. Opt. 46(19) 4008-4014 (2007)

Pulsed laser photofragment emission for detection of mercuric chloride

Alexandra A. Hoops and Thomas A. Reichardt
Appl. Opt. 45(24) 6180-6186 (2006)

Standoff detection of biological agents using laser induced fluorescence—a comparison of 294 nm and 355 nm excitation wavelengths

Øystein Farsund, Gunnar Rustad, and Gunnar Skogan
Biomed. Opt. Express 3(11) 2964-2975 (2012)

Two-photon laser-induced fluorescence of sodium in multiphase combustion

Keke Zhu, Stuart J. Barkley, Chloe E. Dedic, Travis R. Sippel, and James B. Michael
Appl. Opt. 59(18) 5632-5641 (2020)