Abstract

To increase the measurement range of 3D microscopy, Scheimpflug adjustment, in which the imaging plane is tilted with respect to the telecentric lens plane, is often employed. However, the inclined imaging plane will introduce certain distortion to the captured image, which further affects the accuracy of the 3D reconstruction result. In this paper, a distortion model was derived based on the geometric optics theory. With it, the imaging distortion caused by the Scheimpflug condition can be effectively corrected. Experimental results will be presented to demonstrate the feasibility and validity of the proposed method.

© 2015 Optical Society of America

Accurate and flexible calibration method for a 3D microscopic structured light system with telecentric imaging and Scheimpflug projection

Huiwen Deng, Pengyu Hu, Guofeng Zhang, Chengsheng Xia, Yindi Cai, and Shuming Yang
Opt. Express 31(2) 3092-3113 (2023)

Flexible and accurate system calibration method in microscopic fringe projection profilometry

Junlin Du, Xiaopeng Luo, Jiangping Zhu, Shiyong An, and Pei Zhou
Appl. Opt. 63(2) 383-389 (2024)

Telecentric 3D profilometry based on phase-shifting fringe projection

Dong Li, Chunyang Liu, and Jindong Tian
Opt. Express 22(26) 31826-31835 (2014)

Calibration method for projector-camera-based telecentric fringe projection profilometry system

Haibo Liu, Huijing Lin, and Linshen Yao
Opt. Express 25(25) 31492-31508 (2017)

Flexible calibration method for microscopic structured light system using telecentric lens

Beiwen Li and Song Zhang
Opt. Express 23(20) 25795-25803 (2015)