Abstract

White-light interferometry has turned into a standard tool in the field of high-accuracy topography measurements. Nevertheless, surfaces with relatively large local surface tilts or height steps often give rise to systematic measuring errors. The reasons are diffraction and dispersion effects, which cause deviations between height values obtained from the envelope maximum of the white-light interference signal and those obtained from the signal's phase. In certain cases this may result in ghost steps appearing in the measured topography. To identify and eliminate these ghost steps we use a second LED emitting light at a different mean wavelength. This now allows the measurement of curved or structured specular surfaces with high resolution, which up to now was restricted by the mentioned effects.

© 2007 Optical Society of America

Passive vibration compensation in scanning white-light interferometry

Stanislav Tereschenko, Peter Lehmann, Lisa Zellmer, and Angelika Brueckner-Foit
Appl. Opt. 55(23) 6172-6182 (2016)

Lateral resolution and transfer characteristics of vertical scanning white-light interferometers

Weichang Xie, Peter Lehmann, and Jan Niehues
Appl. Opt. 51(11) 1795-1803 (2012)

Complete fringe order determination in scanning white-light interferometry using a Fourier-based technique

Young-Sik Ghim and Angela Davies
Appl. Opt. 51(12) 1922-1928 (2012)

Harnessing spectral property of dual wavelength white LED to improve vertical scanning interferometry

Wee Keat Chong, Xiang Li, and Yeng Chai Soh
Appl. Opt. 52(19) 4652-4662 (2013)

Fringe modulation skewing effect in white-light vertical scanning interferometry

Akiko Harasaki and James C. Wyant
Appl. Opt. 39(13) 2101-2106 (2000)