Add to BibSonomyAbstract
A coherent three-dimensional (angle–angle–range) lidar imager using a master-oscillator-power-amplifier concept and operating at a wavelength of 1.5 μm with chirp-pulse compression is described. A fiber-optic delay line in the local oscillator path enables a single continuous-wave semiconductor laser source with a modulated drive waveform to generate both the constant-frequency local oscillator and the frequency chirp. A portion of this chirp is gated out and amplified by a two-stage fiber amplifier. The digitized return signal was compressed by cross correlating it with a sample of the outgoing pulse. In this way a 350-ns, 10-μJ pulse with a 250-MHz frequency sweep is compressed to a width of approximately 8 ns. With a 25-mm output aperture, the lidar has been used to produce three-dimensional images of hard targets out to a range of approximately 2 km with near-diffraction-limited angular resolution and submeter range resolution.
© 2005 Optical Society of America
Full Article | PDF ArticleMore Like This
Youzhi Li, Alan Hoskins, Friso Schlottau, Kelvin H. Wagner, Carl Embry, and William Randall Babbitt
Appl. Opt. 45(25) 6409-6420 (2006)
Christopher A. Hill, Michael Harris, and Kevin D. Ridley
Appl. Opt. 46(20) 4376-4385 (2007)
Marc L. Simpson, Meng-Dawn Cheng, Thang Q. Dam, Katey E. Lenox, Jeff R. Price, John M. Storey, Eric A. Wachter, and Walt G. Fisher
Appl. Opt. 44(33) 7210-7217 (2005)