Abstract

A novel system for on-line measurement of the distance from the melt pool to the lens in laser material processing is described. A spectrometer analyzes the broadband radiation that is produced at the laser–workpiece interaction zone and then focused by the effector optics in the direction of the laser source. From the influence of chromatic aberration on the detected radiation spectrum, the distance from the workpiece to the lens can be derived. An analytical calculation of the shift of the melt pool spectrum that depends on the distance between the molten zone and the focusing lens shows good agreement with the measured results.

© 2001 Optical Society of America

Optical sensor to monitor and control temperature and build height of the laser direct-casting process

Mahlen D. T. Fox, Duncan P. Hand, Daoning Su, Julian D. C. Jones, Stephen A. Morgan, Mark A. McLean, and William M. Steen
Appl. Opt. 37(36) 8429-8433 (1998)

Focus control system for laser welding

Francis M. Haran, Duncan P. Hand, Chris Peters, and Julian D. C. Jones
Appl. Opt. 36(21) 5246-5251 (1997)

Optical sensor for real-time monitoring of CO₂ laser welding process

Antonio Ancona, Vincenzo Spagnolo, Pietro Mario Lugarà, and Michele Ferrara
Appl. Opt. 40(33) 6019-6025 (2001)

Applications of optical sensing for laser cutting and drilling

Mahlen D. T. Fox, Paul French, Chris Peters, Duncan P. Hand, and Julian D. C. Jones
Appl. Opt. 41(24) 4988-4995 (2002)

Calculation of focal positions in an optical head for parallel data processing with a monolithic four-beam laser diode

Masahisa Shinoda
Appl. Opt. 40(7) 1065-1073 (2001)