Abstract

The influence of angular mirror-orientation errors on the length of a Fabry–Perot resonator is analyzed geometrically. Under conditions in which dominant errors are static or vary slowly over time, the analysis permits a simple prediction of the spectrum of short-term cavity length fluctuations resulting from mirror-orientation noise. The resulting model is applicable to the design of mirror control systems for the Laser Interferometer Gravitational-Wave Observatory, which will monitor separations between mirrored surfaces of suspended inertial test bodies as a way to measure astrophysical gravitational radiation. The analysis is verified by measuring the response of the Laser Interferometer Gravitational-Wave Observatory’s 40-m interferometer test-bed to the rotation of its mirrors.

© 1994 Optical Society of America

Shot noise in gravitational-wave detectors with Fabry–Perot arms

Torrey T. Lyons, Martin W. Regehr, and Frederick J. Raab
Appl. Opt. 39(36) 6761-6770 (2000)

Alignment of an interferometric gravitational wave detector

Peter Fritschel, Nergis Mavalvala, David Shoemaker, Daniel Sigg, Michael Zucker, and Gabriela González
Appl. Opt. 37(28) 6734-6747 (1998)

High-gain power recycling of a Fabry–Perot Michelson interferometer for a gravitational-wave antenna

Shuichi Sato, Masatake Ohashi, Masa-Katsu Fujimoto, Mitsuhiro Fukushima, Koichi Waseda, Shinji Miyoki, Nergis Mavalvala, and Hiroaki Yamamoto
Appl. Opt. 39(25) 4616-4620 (2000)

Angular instability due to radiation pressure in the LIGO gravitational-wave detector

Eiichi Hirose, Keita Kawabe, Daniel Sigg, Rana Adhikari, and Peter R. Saulson
Appl. Opt. 49(18) 3474-3484 (2010)

Twin mirrors for laser interferometric gravitational-wave detectors

Benoît Sassolas, Quentin Benoît, Raffaele Flaminio, Danièle Forest, Janyce Franc, Massimo Galimberti, Aline Lacoudre, Christophe Michel, Jean-Luc Montorio, Nazario Morgado, and Laurent Pinard
Appl. Opt. 50(13) 1894-1899 (2011)