Abstract

A sensitive measurement technique to determine the absolute optical bandwidth of high-resolution interferometers is demonstrated. The technique is based on the Doppler shift of a single-mode laser output. Results of the bandwidth measurement of a 10-MHz interferometer are presented.

© 1984 Optical Society of America

High-spectral-resolution Mie Doppler lidar based on a two-stage Fabry–Perot etalon for tropospheric wind and aerosol accurate measurement

Fahua Shen, Jie Ji, Chenbo Xie, Zhao Wang, and Bangxin Wang
Appl. Opt. 58(9) 2216-2225 (2019)

Fabry–Perot etalon-based ultraviolet trifrequency high-spectral-resolution lidar for wind, temperature, and aerosol measurements from 0.2 to 35 km altitude

Fahua Shen, Chenbo Xie, Chengqun Qiu, and Bangxin Wang
Appl. Opt. 57(31) 9328-9340 (2018)

Analytical description of a Fabry-Perot spectrometer. 7: TESS, a high-luminosity high-resolution twin-etalon scanning spectrometer

G. Hernandez
Appl. Opt. 21(3) 507-513 (1982)

Demonstration of daytime wind measurement by using mobile Rayleigh Doppler Lidar incorporating cascaded Fabry-Perot etalons

YuLi Han, Dongsong Sun, Fei Han, Hengjia Liu, Ruocan Zhao, Jun Zhen, NanNan Zhang, Chong Chen, and Zimu Li
Opt. Express 27(23) 34230-34246 (2019)

Ultraviolet high-spectral-resolution Rayleigh–Mie lidar with a dual-pass Fabry–Perot etalon for measuring atmospheric temperature profiles of the troposphere

Dengxin Hua, Masaru Uchida, and Takao Kobayashi
Opt. Lett. 29(10) 1063-1065 (2004)