Add to BibSonomyAbstract
Polarization characteristics of vertical-cavity surface-emitting lasers (VCSELs) exhibit significant differences to those of edge-emitting semiconductor lasers, in general the polarization of the fundamental transverse mode can change when the injected current is altered.1,2 It has also been noted that the strain induced during the fabrication causes birefringence in VCSELs.1
© 1996 Optical Society of America
PDF ArticleMore Like This
Mode polarisation in anisotropic vertical-cavity surface emitting lasers
A Valle, L Pesquera, and KA Shore
TuL85 International Quantum Electronics Conference (IQEC) 1996
Selection of polarisation and transverse modes in birefringent vertical-cavity surface emitting lasers (VCSEL)
A. Valle, L. Pesquera, and K.A. Shore
CWF5 The European Conference on Lasers and Electro-Optics (CLEO/Europe) 1996
Comparison of Proton Implanted and Selectively Oxidized Vertical-Cavity Surface-Emitting Lasers
M. Grabherr, B. Weigl, G. Reiner, and K.J. Ebeling
CWF3 The European Conference on Lasers and Electro-Optics (CLEO/Europe) 1996