Abstract

This investigation explored the relation of cathode voltage to stress of magnetron sputtered SiO2 films. Films deposited at potentials from 320 to 500 volts had corresponding film stresses of 195 MPa to 272 MPa.

© 2004 Optical Society of America

PDF Article
More Like This
Particle generation during reactive magnetron sputtering of SiO2 with cylindrical and planar cathodes

M. Vergöhl and D. Rademacher
TuD3 Optical Interference Coatings (OIC) 2010

Improving film stress and surface roughness by using a plasma source in magnetron sputtering

S. Schwyn Thöny, S. Gees, and E. Schüngel
WC.4 Optical Interference Coatings (OIC) 2019

Interface Stress of Oxide Thin Films Produced by DC Pulse Magnetron Sputtering Deposition

Kun-Hsien Lee, Chia-Chen Lee, Chien-Jen Tang, Cheng-Chung Jaing, His-Chao Chen, and Cheng-Chung Lee
WD7 Optical Interference Coatings (OIC) 2010

References

You do not have subscription access to this journal. Citation lists with outbound citation links are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.

Contact your librarian or system administrator
or
Login to access Optica Member Subscription