Abstract

Direct modulation of a 10-nm tunable DBR laser was used to demonstrate 20 km transmission, high fiber-coupled power operation (> 10 mW), low power consumption, and frequency stabilization in burst mode operation for the NGPON2 application.

© 2016 Optical Society of America

PDF Article
More Like This
Measurement and Mitigation of Wavelength Drift due to Self-Heating of Tunable Burst-Mode DML for TWDM-PON

Doutje van Veen, Wolfgang Pöhlmann, Bob Farah, Thomas Pfeiffer, and Peter Vetter
W1D.6 Optical Fiber Communication Conference (OFC) 2014

10 Gb/s Upstream Transmission in TWDM PON Using Duobinary and PAM-4 Modulations with Directly Modulated Tunable DBR Laser

Ning Cheng, Xuejin Yan, Naresh Chand, and Frank Effenberger
ATh3E.4 Asia Communications and Photonics Conference (ACPC) 2013

Investigation of 100G (4x25G) NG-PON2 Upgrade using a Burst Mode Laser based on a Multi-Electrode Laser to enable 100 GHz Wavelength Grid

Vincent Houtsma, Doutje van Veen, Stefano Porto, Nagesh Basavanhally, Cris Bolle, and Harald Schmuck
M1B.3 Optical Fiber Communication Conference (OFC) 2018

References

You do not have subscription access to this journal. Citation lists with outbound citation links are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.

Contact your librarian or system administrator
or
Login to access Optica Member Subscription