Abstract

All the 1.3-μm zero-dispersion single-mode fibers (SMFs) and 1.3-μm optical transmitters in today's CATV networks will be used continuously over a long period of time. Therefore, when a larger optical power budget is required for deeper fiber penetrations in the near future, using 1.3-μm optical amplifiers may be more economically and technically viable than using 1.55-μm erbium-doped fiber amplifiers (EDFAs). Parallel to the evolution process of deep fiber penetration in the subscriber loop will be the matured development of M-ary quadrature-amplitude-modulation (M-QAM) modems and MPEG-I1 codecs, and the gradual replacement of a11 AM-VSB video channels by M-QAM digital video channels. Consequently, it is of great interest to see if potentially low-cost semiconductor optical amplifiers can be used to transport multiple channels of ITU-standardized 64-QAM signals. The feasibility of transmitting 33 channels of 64-QAM signals by using a directly modulated 1.3μm DFB laser and a semiconductor optical amplifier has been recently demonstrated.1 In this paper, we demonstrate that the system power budget can be significantly increased by using an external modulation system.

© 1996 Optical Society of America

PDF Article
More Like This
Hybrid AM-VSB/256-QAM multichannel video transmission over 120 km of standard single-mode fiber with three cascaded EDFAs

Hongxing Dai, Chinlon Lin, and Shlomo Ovadia
CFB3 Conference on Lasers and Electro-Optics (CLEO) 1996

References

You do not have subscription access to this journal. Citation lists with outbound citation links are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.

Contact your librarian or system administrator
or
Login to access Optica Member Subscription